ark1668ed-bsp/linux/Documentation/devicetree/bindings/interrupt-controller/apple,aic.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/apple,aic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Apple Interrupt Controller

maintainers:
  - Hector Martin <marcan@marcan.st>

description: |
  The Apple Interrupt Controller is a simple interrupt controller present on
  Apple ARM SoC platforms, including various iPhone and iPad devices and the
  "Apple Silicon" Macs.

  It provides the following features:

  - Level-triggered hardware IRQs wired to SoC blocks
    - Single mask bit per IRQ
    - Per-IRQ affinity setting
    - Automatic masking on event delivery (auto-ack)
    - Software triggering (ORed with hw line)
  - 2 per-CPU IPIs (meant as "self" and "other", but they are interchangeable
    if not symmetric)
  - Automatic prioritization (single event/ack register per CPU, lower IRQs =
    higher priority)
  - Automatic masking on ack
  - Default "this CPU" register view and explicit per-CPU views

  This device also represents the FIQ interrupt sources on platforms using AIC,
  which do not go through a discrete interrupt controller.

  IPIs may be performed via MMIO registers on all variants of AIC. Starting
  from A11, system registers may also be used for "fast" IPIs. Starting from
  M1, even faster IPIs within the same cluster may be achieved by writing to
  a "local" fast IPI register as opposed to using the "global" fast IPI
  register.

allOf:
  - $ref: /schemas/interrupt-controller.yaml#

properties:
  compatible:
    items:
      - enum:
          - apple,s5l8960x-aic
          - apple,t7000-aic
          - apple,s8000-aic
          - apple,t8010-aic
          - apple,t8015-aic
          - apple,t8103-aic
      - const: apple,aic

  interrupt-controller: true

  '#interrupt-cells':
    const: 3
    description: |
      The 1st cell contains the interrupt type:
        - 0: Hardware IRQ
        - 1: FIQ

      The 2nd cell contains the interrupt number.
        - HW IRQs: interrupt number
        - FIQs:
          - 0: physical HV timer
          - 1: virtual HV timer
          - 2: physical guest timer
          - 3: virtual guest timer
          - 4: 'efficient' CPU PMU
          - 5: 'performance' CPU PMU

      The 3rd cell contains the interrupt flags. This is normally
      IRQ_TYPE_LEVEL_HIGH (4).

  reg:
    description: |
      Specifies base physical address and size of the AIC registers.
    maxItems: 1

  power-domains:
    maxItems: 1

  affinities:
    type: object
    additionalProperties: false
    description:
      FIQ affinity can be expressed as a single "affinities" node,
      containing a set of sub-nodes, one per FIQ with a non-default
      affinity.
    patternProperties:
      "^.+-affinity$":
        type: object
        additionalProperties: false
        properties:
          apple,fiq-index:
            description:
              The interrupt number specified as a FIQ, and for which
              the affinity is not the default.
            $ref: /schemas/types.yaml#/definitions/uint32
            maximum: 5

          cpus:
            description:
              Should be a list of phandles to CPU nodes (as described in
              Documentation/devicetree/bindings/arm/cpus.yaml).

        required:
          - apple,fiq-index
          - cpus

required:
  - compatible
  - '#interrupt-cells'
  - interrupt-controller
  - reg

additionalProperties: false

examples:
  - |
    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        aic: interrupt-controller@23b100000 {
            compatible = "apple,t8103-aic", "apple,aic";
            #interrupt-cells = <3>;
            interrupt-controller;
            reg = <0x2 0x3b100000 0x0 0x8000>;
        };
    };