ark1668ed-bsp/linux/Documentation/devicetree/bindings/interrupt-controller/mti,gic.yaml

# SPDX-License-Identifier: GPL-2.0-only
%YAML 1.2
---
$id: http://devicetree.org/schemas/interrupt-controller/mti,gic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: MIPS Global Interrupt Controller

maintainers:
  - Paul Burton <paulburton@kernel.org>
  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>

description: |
  The MIPS GIC routes external interrupts to individual VPEs and IRQ pins.
  It also supports local (per-processor) interrupts and software-generated
  interrupts which can be used as IPIs. The GIC also includes a free-running
  global timer, per-CPU count/compare timers, and a watchdog.

properties:
  compatible:
    const: mti,gic

  "#interrupt-cells":
    const: 3
    description: |
      The 1st cell is the type of interrupt: local or shared defined in the
      file 'dt-bindings/interrupt-controller/mips-gic.h'. The 2nd cell is the
      GIC interrupt number. The 3d cell encodes the interrupt flags setting up
      the IRQ trigger modes, which are defined in the file
      'dt-bindings/interrupt-controller/irq.h'.

  reg:
    description: |
      Base address and length of the GIC registers space. If not present,
      the base address reported by the hardware GCR_GIC_BASE will be used.
    maxItems: 1

  interrupt-controller: true

  mti,reserved-cpu-vectors:
    description: |
      Specifies the list of CPU interrupt vectors to which the GIC may not
      route interrupts. This property is ignored if the CPU is started in EIC
      mode.
    $ref: /schemas/types.yaml#/definitions/uint32-array
    minItems: 1
    maxItems: 6
    uniqueItems: true
    items:
      minimum: 2
      maximum: 7

  mti,reserved-ipi-vectors:
    description: |
      Specifies the range of GIC interrupts that are reserved for IPIs.
      It accepts two values: the 1st is the starting interrupt and the 2nd is
      the size of the reserved range. If not specified, the driver will
      allocate the last (2 * number of VPEs in the system).
    $ref: /schemas/types.yaml#/definitions/uint32-array
    items:
      - minimum: 0
        maximum: 254
      - minimum: 2
        maximum: 254

  timer:
    type: object
    description: |
      MIPS GIC includes a free-running global timer, per-CPU count/compare
      timers, and a watchdog. Currently only the GIC Timer is supported.
    properties:
      compatible:
        const: mti,gic-timer

      interrupts:
        description: |
          Interrupt for the GIC local timer, so normally it's suppose to be of
          <GIC_LOCAL X IRQ_TYPE_NONE> format.
        maxItems: 1

      clocks:
        maxItems: 1

      clock-frequency: true

    required:
      - compatible
      - interrupts

    oneOf:
      - required:
          - clocks
      - required:
          - clock-frequency

    additionalProperties: false

additionalProperties: false

required:
  - compatible
  - "#interrupt-cells"
  - interrupt-controller

examples:
  - |
    #include <dt-bindings/interrupt-controller/mips-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    interrupt-controller@1bdc0000 {
      compatible = "mti,gic";
      reg = <0x1bdc0000 0x20000>;
      interrupt-controller;
      #interrupt-cells = <3>;
      mti,reserved-cpu-vectors = <7>;
      mti,reserved-ipi-vectors = <40 8>;

      timer {
        compatible = "mti,gic-timer";
        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
        clock-frequency = <50000000>;
      };
    };
  - |
    #include <dt-bindings/interrupt-controller/mips-gic.h>
    #include <dt-bindings/interrupt-controller/irq.h>

    interrupt-controller@1bdc0000 {
      compatible = "mti,gic";
      reg = <0x1bdc0000 0x20000>;
      interrupt-controller;
      #interrupt-cells = <3>;

      timer {
        compatible = "mti,gic-timer";
        interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
        clocks = <&cpu_pll>;
      };
    };
  - |
    interrupt-controller {
      compatible = "mti,gic";
      interrupt-controller;
      #interrupt-cells = <3>;
    };
...