ark1668ed-bsp/linux/Documentation/devicetree/bindings/memory-controllers/fsl/fsl,ifc.yaml

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/memory-controllers/fsl/fsl,ifc.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: FSL/NXP Integrated Flash Controller

maintainers:
  - Shawn Guo <shawnguo@kernel.org>

description: |
  NXP's integrated flash controller (IFC) is an advanced version of the
  enhanced local bus controller which includes similar programming and signal
  interfaces with an extended feature set. The IFC provides access to multiple
  external memory types, such as NAND flash (SLC and MLC), NOR flash, EPROM,
  SRAM and other memories where address and data are shared on a bus.

properties:
  $nodename:
    pattern: "^memory-controller@[0-9a-f]+$"

  compatible:
    const: fsl,ifc

  "#address-cells":
    enum: [2, 3]
    description: |
      Should be either two or three.  The first cell is the chipselect
      number, and the remaining cells are the offset into the chipselect.

  "#size-cells":
    enum: [1, 2]
    description: |
      Either one or two, depending on how large each chipselect can be.

  reg:
    maxItems: 1

  interrupts:
    minItems: 1
    maxItems: 2
    description: |
      IFC may have one or two interrupts.  If two interrupt specifiers are
      present, the first is the "common" interrupt (CM_EVTER_STAT), and the
      second is the NAND interrupt (NAND_EVTER_STAT).  If there is only one,
      that interrupt reports both types of event.

  little-endian:
    type: boolean
    description: |
      If this property is absent, the big-endian mode will be in use as default
      for registers.

  ranges:
    description: |
      Each range corresponds to a single chipselect, and covers the entire
      access window as configured.

patternProperties:
  "^.*@[a-f0-9]+(,[a-f0-9]+)+$":
    type: object
    description: |
      Child device nodes describe the devices connected to IFC such as NOR (e.g.
      cfi-flash) and NAND (fsl,ifc-nand). There might be board specific devices
      like FPGAs, CPLDs, etc.

    required:
      - compatible
      - reg

required:
  - compatible
  - reg
  - interrupts

additionalProperties: false

examples:
  - |
    soc {
        #address-cells = <2>;
        #size-cells = <2>;

        memory-controller@ffe1e000 {
            compatible = "fsl,ifc";
            #address-cells = <2>;
            #size-cells = <1>;
            reg = <0x0 0xffe1e000 0 0x2000>;
            interrupts = <16 2 19 2>;
            little-endian;

            /* NOR, NAND Flashes and CPLD on board */
            ranges = <0x0 0x0 0x0 0xee000000 0x02000000>,
                     <0x1 0x0 0x0 0xffa00000 0x00010000>,
                     <0x3 0x0 0x0 0xffb00000 0x00020000>;

            flash@0,0 {
                #address-cells = <1>;
                #size-cells = <1>;
                compatible = "cfi-flash";
                reg = <0x0 0x0 0x2000000>;
                bank-width = <2>;
                device-width = <1>;

                partition@0 {
                    /* 32MB for user data */
                    reg = <0x0 0x02000000>;
                    label = "NOR Data";
                };
            };
        };
    };