| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384 |
- # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
- # %YAML 1.2
- ---
- $id: http://devicetree.org/schemas/memory-controllers/rockchip,rk3399-dmc.yaml#
- $schema: http://devicetree.org/meta-schemas/core.yaml#
- title: Rockchip rk3399 DMC (Dynamic Memory Controller) device
- maintainers:
- - Brian Norris <briannorris@chromium.org>
- properties:
- compatible:
- enum:
- - rockchip,rk3399-dmc
- devfreq-events:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- Node to get DDR loading. Refer to
- Documentation/devicetree/bindings/devfreq/event/rockchip,dfi.yaml.
- clocks:
- maxItems: 1
- clock-names:
- items:
- - const: dmc_clk
- operating-points-v2: true
- center-supply:
- description:
- DMC regulator supply.
- rockchip,pmu:
- $ref: /schemas/types.yaml#/definitions/phandle
- description:
- Phandle to the syscon managing the "PMU general register files".
- interrupts:
- maxItems: 1
- description:
- The CPU interrupt number. It should be a DCF interrupt. When DDR DVFS
- finishes, a DCF interrupt is triggered.
- rockchip,ddr3_speed_bin:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- For values, reference include/dt-bindings/clock/rk3399-ddr.h. Selects the
- DDR3 cl-trp-trcd type. It must be set according to "Speed Bin" in DDR3
- datasheet; DO NOT use a smaller "Speed Bin" than specified for the DDR3
- being used.
- rockchip,pd_idle:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Configure the PD_IDLE value. Defines the power-down idle period in which
- memories are placed into power-down mode if bus is idle for PD_IDLE DFI
- clock cycles.
- See also rockchip,pd-idle-ns.
- rockchip,sr_idle:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Configure the SR_IDLE value. Defines the self-refresh idle period in
- which memories are placed into self-refresh mode if bus is idle for
- SR_IDLE * 1024 DFI clock cycles (DFI clocks freq is half of DRAM clock).
- See also rockchip,sr-idle-ns.
- default: 0
- rockchip,sr_mc_gate_idle:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Defines the memory self-refresh and controller clock gating idle period.
- Memories are placed into self-refresh mode and memory controller clock
- arg gating started if bus is idle for sr_mc_gate_idle*1024 DFI clock
- cycles.
- See also rockchip,sr-mc-gate-idle-ns.
- rockchip,srpd_lite_idle:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Defines the self-refresh power down idle period in which memories are
- placed into self-refresh power down mode if bus is idle for
- srpd_lite_idle * 1024 DFI clock cycles. This parameter is for LPDDR4
- only.
- See also rockchip,srpd-lite-idle-ns.
- rockchip,standby_idle:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Defines the standby idle period in which memories are placed into
- self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
- if bus is idle for standby_idle * DFI clock cycles.
- See also rockchip,standby-idle-ns.
- rockchip,dram_dll_dis_freq:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Defines the DDR3 DLL bypass frequency in MHz. When DDR frequency is less
- than DRAM_DLL_DISB_FREQ, DDR3 DLL will be bypassed.
- Note: if DLL was bypassed, the odt will also stop working.
- rockchip,phy_dll_dis_freq:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description: |
- Defines the PHY dll bypass frequency in MHz (Mega Hz). When DDR frequency
- is less than DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
- Note: PHY DLL and PHY ODT are independent.
- rockchip,auto_pd_dis_freq:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- Defines the auto PD disable frequency in MHz.
- rockchip,ddr3_odt_dis_freq:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1000000 # In case anyone thought this was MHz.
- description:
- When the DRAM type is DDR3, this parameter defines the ODT disable
- frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
- the ODT on the DRAM side and controller side are both disabled.
- rockchip,ddr3_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is DDR3, this parameter defines the DRAM side drive
- strength in ohms.
- default: 40
- rockchip,ddr3_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is DDR3, this parameter defines the DRAM side ODT
- strength in ohms.
- default: 120
- rockchip,phy_ddr3_ca_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is DDR3, this parameter defines the phy side CA line
- (including command line, address line and clock line) drive strength.
- default: 40
- rockchip,phy_ddr3_dq_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is DDR3, this parameter defines the PHY side DQ line
- (including DQS/DQ/DM line) drive strength.
- default: 40
- rockchip,phy_ddr3_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is DDR3, this parameter defines the PHY side ODT
- strength.
- default: 240
- rockchip,lpddr3_odt_dis_freq:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1000000 # In case anyone thought this was MHz.
- description:
- When the DRAM type is LPDDR3, this parameter defines then ODT disable
- frequency in Hz. When DDR frequency is less then ddr3_odt_dis_freq, the
- ODT on the DRAM side and controller side are both disabled.
- rockchip,lpddr3_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR3, this parameter defines the DRAM side drive
- strength in ohms.
- default: 34
- rockchip,lpddr3_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR3, this parameter defines the DRAM side ODT
- strength in ohms.
- default: 240
- rockchip,phy_lpddr3_ca_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR3, this parameter defines the PHY side CA line
- (including command line, address line and clock line) drive strength.
- default: 40
- rockchip,phy_lpddr3_dq_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR3, this parameter defines the PHY side DQ line
- (including DQS/DQ/DM line) drive strength.
- default: 40
- rockchip,phy_lpddr3_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When dram type is LPDDR3, this parameter define the phy side odt
- strength, default value is 240.
- rockchip,lpddr4_odt_dis_freq:
- $ref: /schemas/types.yaml#/definitions/uint32
- minimum: 1000000 # In case anyone thought this was MHz.
- description:
- When the DRAM type is LPDDR4, this parameter defines the ODT disable
- frequency in Hz. When the DDR frequency is less then ddr3_odt_dis_freq,
- the ODT on the DRAM side and controller side are both disabled.
- rockchip,lpddr4_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the DRAM side drive
- strength in ohms.
- default: 60
- rockchip,lpddr4_dq_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
- DQS/DQ line strength in ohms.
- default: 40
- rockchip,lpddr4_ca_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the DRAM side ODT on
- CA line strength in ohms.
- default: 40
- rockchip,phy_lpddr4_ca_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the PHY side CA line
- (including command address line) drive strength.
- default: 40
- rockchip,phy_lpddr4_ck_cs_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the PHY side clock
- line and CS line drive strength.
- default: 80
- rockchip,phy_lpddr4_dq_drv:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the PHY side DQ line
- (including DQS/DQ/DM line) drive strength.
- default: 80
- rockchip,phy_lpddr4_odt:
- deprecated: true
- $ref: /schemas/types.yaml#/definitions/uint32
- description:
- When the DRAM type is LPDDR4, this parameter defines the PHY side ODT
- strength.
- default: 60
- rockchip,pd-idle-ns:
- description:
- Configure the PD_IDLE value in nanoseconds. Defines the power-down idle
- period in which memories are placed into power-down mode if bus is idle
- for PD_IDLE nanoseconds.
- rockchip,sr-idle-ns:
- description:
- Configure the SR_IDLE value in nanoseconds. Defines the self-refresh idle
- period in which memories are placed into self-refresh mode if bus is idle
- for SR_IDLE nanoseconds.
- default: 0
- rockchip,sr-mc-gate-idle-ns:
- description:
- Defines the memory self-refresh and controller clock gating idle period in nanoseconds.
- Memories are placed into self-refresh mode and memory controller clock
- arg gating started if bus is idle for sr_mc_gate_idle nanoseconds.
- rockchip,srpd-lite-idle-ns:
- description:
- Defines the self-refresh power down idle period in which memories are
- placed into self-refresh power down mode if bus is idle for
- srpd_lite_idle nanoseconds. This parameter is for LPDDR4 only.
- rockchip,standby-idle-ns:
- description:
- Defines the standby idle period in which memories are placed into
- self-refresh mode. The controller, pi, PHY and DRAM clock will be gated
- if bus is idle for standby_idle nanoseconds.
- rockchip,pd-idle-dis-freq-hz:
- description:
- Defines the power-down idle disable frequency in Hz. When the DDR
- frequency is greater than pd-idle-dis-freq, power-down idle is disabled.
- See also rockchip,pd-idle-ns.
- rockchip,sr-idle-dis-freq-hz:
- description:
- Defines the self-refresh idle disable frequency in Hz. When the DDR
- frequency is greater than sr-idle-dis-freq, self-refresh idle is
- disabled. See also rockchip,sr-idle-ns.
- rockchip,sr-mc-gate-idle-dis-freq-hz:
- description:
- Defines the self-refresh and memory-controller clock gating disable
- frequency in Hz. When the DDR frequency is greater than
- sr-mc-gate-idle-dis-freq, the clock will not be gated when idle. See also
- rockchip,sr-mc-gate-idle-ns.
- rockchip,srpd-lite-idle-dis-freq-hz:
- description:
- Defines the self-refresh power down idle disable frequency in Hz. When
- the DDR frequency is greater than srpd-lite-idle-dis-freq, memory will
- not be placed into self-refresh power down mode when idle. See also
- rockchip,srpd-lite-idle-ns.
- rockchip,standby-idle-dis-freq-hz:
- description:
- Defines the standby idle disable frequency in Hz. When the DDR frequency
- is greater than standby-idle-dis-freq, standby idle is disabled. See also
- rockchip,standby-idle-ns.
- required:
- - compatible
- - devfreq-events
- - clocks
- - clock-names
- - operating-points-v2
- - center-supply
- additionalProperties: false
- examples:
- - |
- #include <dt-bindings/clock/rk3399-cru.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- memory-controller {
- compatible = "rockchip,rk3399-dmc";
- devfreq-events = <&dfi>;
- rockchip,pmu = <&pmu>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_DDRC>;
- clock-names = "dmc_clk";
- operating-points-v2 = <&dmc_opp_table>;
- center-supply = <&ppvar_centerlogic>;
- rockchip,pd-idle-ns = <160>;
- rockchip,sr-idle-ns = <10240>;
- rockchip,sr-mc-gate-idle-ns = <40960>;
- rockchip,srpd-lite-idle-ns = <61440>;
- rockchip,standby-idle-ns = <81920>;
- rockchip,ddr3_odt_dis_freq = <333000000>;
- rockchip,lpddr3_odt_dis_freq = <333000000>;
- rockchip,lpddr4_odt_dis_freq = <333000000>;
- rockchip,pd-idle-dis-freq-hz = <1000000000>;
- rockchip,sr-idle-dis-freq-hz = <1000000000>;
- rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
- rockchip,srpd-lite-idle-dis-freq-hz = <0>;
- rockchip,standby-idle-dis-freq-hz = <928000000>;
- };
|