ark1668ed-bsp/linux/Documentation/driver-api/pci/p2pdma.rst

.. SPDX-License-Identifier: GPL-2.0

============================
PCI Peer-to-Peer DMA Support
============================

The PCI bus has pretty decent support for performing DMA transfers
between two devices on the bus. This type of transaction is henceforth
called Peer-to-Peer (or P2P). However, there are a number of issues that
make P2P transactions tricky to do in a perfectly safe way.

One of the biggest issues is that PCI doesn't require forwarding
transactions between hierarchy domains, and in PCIe, each Root Port
defines a separate hierarchy domain. To make things worse, there is no
simple way to determine if a given Root Complex supports this or not.
(See PCIe r4.0, sec 1.3.1). Therefore, as of this writing, the kernel
only supports doing P2P when the endpoints involved are all behind the
same PCI bridge, as such devices are all in the same PCI hierarchy
domain, and the spec guarantees that all transactions within the
hierarchy will be routable, but it does not require routing
between hierarchies.

The second issue is that to make use of existing interfaces in Linux,
memory that is used for P2P transactions needs to be backed by struct
pages. However, PCI BARs are not typically cache coherent so there are
a few corner case gotchas with these pages so developers need to
be careful about what they do with them.


Driver Writer's Guide
=====================

In a given P2P implementation there may be three or more different
types of kernel drivers in play:

* Provider - A driver which provides or publishes P2P resources like
  memory or doorbell registers to other drivers.
* Client - A driver which makes use of a resource by setting up a
  DMA transaction to or from it.
* Orchestrator - A driver which orchestrates the flow of data between
  clients and providers.

In many cases there could be overlap between these three types (i.e.,
it may be typical for a driver to be both a provider and a client).

For example, in the NVMe Target Copy Offload implementation:

* The NVMe PCI driver is both a client, provider and orchestrator
  in that it exposes any CMB (Controller Memory Buffer) as a P2P memory
  resource (provider), it accepts P2P memory pages as buffers in requests
  to be used directly (client) and it can also make use of the CMB as
  submission queue entries (orchestrator).
* The RDMA driver is a client in this arrangement so that an RNIC
  can DMA directly to the memory exposed by the NVMe device.
* The NVMe Target driver (nvmet) can orchestrate the data from the RNIC
  to the P2P memory (CMB) and then to the NVMe device (and vice versa).

This is currently the only arrangement supported by the kernel but
one could imagine slight tweaks to this that would allow for the same
functionality. For example, if a specific RNIC added a BAR with some
memory behind it, its driver could add support as a P2P provider and
then the NVMe Target could use the RNIC's memory instead of the CMB
in cases where the NVMe cards in use do not have CMB support.


Provider Drivers
----------------

A provider simply needs to register a BAR (or a portion of a BAR)
as a P2P DMA resource using :c:func:`pci_p2pdma_add_resource()`.
This will register struct pages for all the specified memory.

After that it may optionally publish all of its resources as
P2P memory using :c:func:`pci_p2pmem_publish()`. This will allow
any orchestrator drivers to find and use the memory. When marked in
this way, the resource must be regular memory with no side effects.

For the time being this is fairly rudimentary in that all resources
are typically going to be P2P memory. Future work will likely expand
this to include other types of resources like doorbells.


Client Drivers
--------------

A client driver only has to use the mapping API :c:func:`dma_map_sg()`
and :c:func:`dma_unmap_sg()` functions as usual, and the implementation
will do the right thing for the P2P capable memory.


Orchestrator Drivers
--------------------

The first task an orchestrator driver must do is compile a list of
all client devices that will be involved in a given transaction. For
example, the NVMe Target driver creates a list including the namespace
block device and the RNIC in use. If the orchestrator has access to
a specific P2P provider to use it may check compatibility using
:c:func:`pci_p2pdma_distance()` otherwise it may find a memory provider
that's compatible with all clients using  :c:func:`pci_p2pmem_find()`.
If more than one provider is supported, the one nearest to all the clients will
be chosen first. If more than one provider is an equal distance away, the
one returned will be chosen at random (it is not an arbitrary but
truly random). This function returns the PCI device to use for the provider
with a reference taken and therefore when it's no longer needed it should be
returned with pci_dev_put().

Once a provider is selected, the orchestrator can then use
:c:func:`pci_alloc_p2pmem()` and :c:func:`pci_free_p2pmem()` to
allocate P2P memory from the provider. :c:func:`pci_p2pmem_alloc_sgl()`
and :c:func:`pci_p2pmem_free_sgl()` are convenience functions for
allocating scatter-gather lists with P2P memory.

Struct Page Caveats
-------------------

Driver writers should be very careful about not passing these special
struct pages to code that isn't prepared for it. At this time, the kernel
interfaces do not have any checks for ensuring this. This obviously
precludes passing these pages to userspace.

P2P memory is also technically IO memory but should never have any side
effects behind it. Thus, the order of loads and stores should not be important
and ioreadX(), iowriteX() and friends should not be necessary.


P2P DMA Support Library
=======================

.. kernel-doc:: drivers/pci/p2pdma.c
   :export: