uniphier-ld11.dtsi 15 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673
  1. // SPDX-License-Identifier: GPL-2.0+ OR MIT
  2. //
  3. // Device Tree Source for UniPhier LD11 SoC
  4. //
  5. // Copyright (C) 2016 Socionext Inc.
  6. // Author: Masahiro Yamada <yamada.masahiro@socionext.com>
  7. #include <dt-bindings/gpio/gpio.h>
  8. #include <dt-bindings/gpio/uniphier-gpio.h>
  9. #include <dt-bindings/interrupt-controller/arm-gic.h>
  10. / {
  11. compatible = "socionext,uniphier-ld11";
  12. #address-cells = <2>;
  13. #size-cells = <2>;
  14. interrupt-parent = <&gic>;
  15. cpus {
  16. #address-cells = <2>;
  17. #size-cells = <0>;
  18. cpu-map {
  19. cluster0 {
  20. core0 {
  21. cpu = <&cpu0>;
  22. };
  23. core1 {
  24. cpu = <&cpu1>;
  25. };
  26. };
  27. };
  28. cpu0: cpu@0 {
  29. device_type = "cpu";
  30. compatible = "arm,cortex-a53";
  31. reg = <0 0x000>;
  32. clocks = <&sys_clk 33>;
  33. enable-method = "psci";
  34. next-level-cache = <&l2>;
  35. operating-points-v2 = <&cluster0_opp>;
  36. };
  37. cpu1: cpu@1 {
  38. device_type = "cpu";
  39. compatible = "arm,cortex-a53";
  40. reg = <0 0x001>;
  41. clocks = <&sys_clk 33>;
  42. enable-method = "psci";
  43. next-level-cache = <&l2>;
  44. operating-points-v2 = <&cluster0_opp>;
  45. };
  46. l2: l2-cache {
  47. compatible = "cache";
  48. cache-level = <2>;
  49. cache-unified;
  50. };
  51. };
  52. cluster0_opp: opp-table {
  53. compatible = "operating-points-v2";
  54. opp-shared;
  55. opp-245000000 {
  56. opp-hz = /bits/ 64 <245000000>;
  57. clock-latency-ns = <300>;
  58. };
  59. opp-250000000 {
  60. opp-hz = /bits/ 64 <250000000>;
  61. clock-latency-ns = <300>;
  62. };
  63. opp-490000000 {
  64. opp-hz = /bits/ 64 <490000000>;
  65. clock-latency-ns = <300>;
  66. };
  67. opp-500000000 {
  68. opp-hz = /bits/ 64 <500000000>;
  69. clock-latency-ns = <300>;
  70. };
  71. opp-653334000 {
  72. opp-hz = /bits/ 64 <653334000>;
  73. clock-latency-ns = <300>;
  74. };
  75. opp-666667000 {
  76. opp-hz = /bits/ 64 <666667000>;
  77. clock-latency-ns = <300>;
  78. };
  79. opp-980000000 {
  80. opp-hz = /bits/ 64 <980000000>;
  81. clock-latency-ns = <300>;
  82. };
  83. };
  84. psci {
  85. compatible = "arm,psci-1.0";
  86. method = "smc";
  87. };
  88. clocks {
  89. refclk: ref {
  90. compatible = "fixed-clock";
  91. #clock-cells = <0>;
  92. clock-frequency = <25000000>;
  93. };
  94. };
  95. emmc_pwrseq: emmc-pwrseq {
  96. compatible = "mmc-pwrseq-emmc";
  97. reset-gpios = <&gpio UNIPHIER_GPIO_PORT(3, 2) GPIO_ACTIVE_LOW>;
  98. };
  99. timer {
  100. compatible = "arm,armv8-timer";
  101. interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
  102. <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
  103. <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
  104. <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
  105. };
  106. reserved-memory {
  107. #address-cells = <2>;
  108. #size-cells = <2>;
  109. ranges;
  110. secure-memory@81000000 {
  111. reg = <0x0 0x81000000 0x0 0x01000000>;
  112. no-map;
  113. };
  114. };
  115. soc@0 {
  116. compatible = "simple-bus";
  117. #address-cells = <1>;
  118. #size-cells = <1>;
  119. ranges = <0 0 0 0xffffffff>;
  120. spi0: spi@54006000 {
  121. compatible = "socionext,uniphier-scssi";
  122. status = "disabled";
  123. reg = <0x54006000 0x100>;
  124. #address-cells = <1>;
  125. #size-cells = <0>;
  126. interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
  127. pinctrl-names = "default";
  128. pinctrl-0 = <&pinctrl_spi0>;
  129. clocks = <&peri_clk 11>;
  130. resets = <&peri_rst 11>;
  131. };
  132. spi1: spi@54006100 {
  133. compatible = "socionext,uniphier-scssi";
  134. status = "disabled";
  135. reg = <0x54006100 0x100>;
  136. #address-cells = <1>;
  137. #size-cells = <0>;
  138. interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
  139. pinctrl-names = "default";
  140. pinctrl-0 = <&pinctrl_spi1>;
  141. clocks = <&peri_clk 12>;
  142. resets = <&peri_rst 12>;
  143. };
  144. serial0: serial@54006800 {
  145. compatible = "socionext,uniphier-uart";
  146. status = "disabled";
  147. reg = <0x54006800 0x40>;
  148. interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
  149. pinctrl-names = "default";
  150. pinctrl-0 = <&pinctrl_uart0>;
  151. clocks = <&peri_clk 0>;
  152. resets = <&peri_rst 0>;
  153. };
  154. serial1: serial@54006900 {
  155. compatible = "socionext,uniphier-uart";
  156. status = "disabled";
  157. reg = <0x54006900 0x40>;
  158. interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
  159. pinctrl-names = "default";
  160. pinctrl-0 = <&pinctrl_uart1>;
  161. clocks = <&peri_clk 1>;
  162. resets = <&peri_rst 1>;
  163. };
  164. serial2: serial@54006a00 {
  165. compatible = "socionext,uniphier-uart";
  166. status = "disabled";
  167. reg = <0x54006a00 0x40>;
  168. interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
  169. pinctrl-names = "default";
  170. pinctrl-0 = <&pinctrl_uart2>;
  171. clocks = <&peri_clk 2>;
  172. resets = <&peri_rst 2>;
  173. };
  174. serial3: serial@54006b00 {
  175. compatible = "socionext,uniphier-uart";
  176. status = "disabled";
  177. reg = <0x54006b00 0x40>;
  178. interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
  179. pinctrl-names = "default";
  180. pinctrl-0 = <&pinctrl_uart3>;
  181. clocks = <&peri_clk 3>;
  182. resets = <&peri_rst 3>;
  183. };
  184. gpio: gpio@55000000 {
  185. compatible = "socionext,uniphier-gpio";
  186. reg = <0x55000000 0x200>;
  187. interrupt-parent = <&aidet>;
  188. interrupt-controller;
  189. #interrupt-cells = <2>;
  190. gpio-controller;
  191. #gpio-cells = <2>;
  192. gpio-ranges = <&pinctrl 0 0 0>,
  193. <&pinctrl 43 0 0>,
  194. <&pinctrl 51 0 0>,
  195. <&pinctrl 96 0 0>,
  196. <&pinctrl 160 0 0>,
  197. <&pinctrl 184 0 0>;
  198. gpio-ranges-group-names = "gpio_range0",
  199. "gpio_range1",
  200. "gpio_range2",
  201. "gpio_range3",
  202. "gpio_range4",
  203. "gpio_range5";
  204. ngpios = <200>;
  205. socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
  206. <21 217 3>;
  207. };
  208. audio@56000000 {
  209. compatible = "socionext,uniphier-ld11-aio";
  210. reg = <0x56000000 0x80000>;
  211. interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
  212. pinctrl-names = "default";
  213. pinctrl-0 = <&pinctrl_aout1>,
  214. <&pinctrl_aoutiec1>;
  215. clock-names = "aio";
  216. clocks = <&sys_clk 40>;
  217. reset-names = "aio";
  218. resets = <&sys_rst 40>;
  219. #sound-dai-cells = <1>;
  220. socionext,syscon = <&soc_glue>;
  221. i2s_port0: port@0 {
  222. i2s_hdmi: endpoint {
  223. };
  224. };
  225. i2s_port1: port@1 {
  226. i2s_pcmin2: endpoint {
  227. };
  228. };
  229. i2s_port2: port@2 {
  230. i2s_line: endpoint {
  231. dai-format = "i2s";
  232. remote-endpoint = <&evea_line>;
  233. };
  234. };
  235. i2s_port3: port@3 {
  236. i2s_hpcmout1: endpoint {
  237. };
  238. };
  239. i2s_port4: port@4 {
  240. i2s_hp: endpoint {
  241. dai-format = "i2s";
  242. remote-endpoint = <&evea_hp>;
  243. };
  244. };
  245. spdif_port0: port@5 {
  246. spdif_hiecout1: endpoint {
  247. };
  248. };
  249. src_port0: port@6 {
  250. i2s_epcmout2: endpoint {
  251. };
  252. };
  253. src_port1: port@7 {
  254. i2s_epcmout3: endpoint {
  255. };
  256. };
  257. comp_spdif_port0: port@8 {
  258. comp_spdif_hiecout1: endpoint {
  259. };
  260. };
  261. };
  262. codec@57900000 {
  263. compatible = "socionext,uniphier-evea";
  264. reg = <0x57900000 0x1000>;
  265. clock-names = "evea", "exiv";
  266. clocks = <&sys_clk 41>, <&sys_clk 42>;
  267. reset-names = "evea", "exiv", "adamv";
  268. resets = <&sys_rst 41>, <&sys_rst 42>, <&adamv_rst 0>;
  269. #sound-dai-cells = <1>;
  270. port@0 {
  271. evea_line: endpoint {
  272. remote-endpoint = <&i2s_line>;
  273. };
  274. };
  275. port@1 {
  276. evea_hp: endpoint {
  277. remote-endpoint = <&i2s_hp>;
  278. };
  279. };
  280. };
  281. syscon@57920000 {
  282. compatible = "socionext,uniphier-ld11-adamv",
  283. "simple-mfd", "syscon";
  284. reg = <0x57920000 0x1000>;
  285. adamv_rst: reset-controller {
  286. compatible = "socionext,uniphier-ld11-adamv-reset";
  287. #reset-cells = <1>;
  288. };
  289. };
  290. i2c0: i2c@58780000 {
  291. compatible = "socionext,uniphier-fi2c";
  292. status = "disabled";
  293. reg = <0x58780000 0x80>;
  294. #address-cells = <1>;
  295. #size-cells = <0>;
  296. interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
  297. pinctrl-names = "default";
  298. pinctrl-0 = <&pinctrl_i2c0>;
  299. clocks = <&peri_clk 4>;
  300. resets = <&peri_rst 4>;
  301. clock-frequency = <100000>;
  302. };
  303. i2c1: i2c@58781000 {
  304. compatible = "socionext,uniphier-fi2c";
  305. status = "disabled";
  306. reg = <0x58781000 0x80>;
  307. #address-cells = <1>;
  308. #size-cells = <0>;
  309. interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
  310. pinctrl-names = "default";
  311. pinctrl-0 = <&pinctrl_i2c1>;
  312. clocks = <&peri_clk 5>;
  313. resets = <&peri_rst 5>;
  314. clock-frequency = <100000>;
  315. };
  316. i2c2: i2c@58782000 {
  317. compatible = "socionext,uniphier-fi2c";
  318. reg = <0x58782000 0x80>;
  319. #address-cells = <1>;
  320. #size-cells = <0>;
  321. interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
  322. clocks = <&peri_clk 6>;
  323. resets = <&peri_rst 6>;
  324. clock-frequency = <400000>;
  325. };
  326. i2c3: i2c@58783000 {
  327. compatible = "socionext,uniphier-fi2c";
  328. status = "disabled";
  329. reg = <0x58783000 0x80>;
  330. #address-cells = <1>;
  331. #size-cells = <0>;
  332. interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
  333. pinctrl-names = "default";
  334. pinctrl-0 = <&pinctrl_i2c3>;
  335. clocks = <&peri_clk 7>;
  336. resets = <&peri_rst 7>;
  337. clock-frequency = <100000>;
  338. };
  339. i2c4: i2c@58784000 {
  340. compatible = "socionext,uniphier-fi2c";
  341. status = "disabled";
  342. reg = <0x58784000 0x80>;
  343. #address-cells = <1>;
  344. #size-cells = <0>;
  345. interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
  346. pinctrl-names = "default";
  347. pinctrl-0 = <&pinctrl_i2c4>;
  348. clocks = <&peri_clk 8>;
  349. resets = <&peri_rst 8>;
  350. clock-frequency = <100000>;
  351. };
  352. i2c5: i2c@58785000 {
  353. compatible = "socionext,uniphier-fi2c";
  354. reg = <0x58785000 0x80>;
  355. #address-cells = <1>;
  356. #size-cells = <0>;
  357. interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
  358. clocks = <&peri_clk 9>;
  359. resets = <&peri_rst 9>;
  360. clock-frequency = <400000>;
  361. };
  362. system_bus: system-bus@58c00000 {
  363. compatible = "socionext,uniphier-system-bus";
  364. status = "disabled";
  365. reg = <0x58c00000 0x400>;
  366. #address-cells = <2>;
  367. #size-cells = <1>;
  368. pinctrl-names = "default";
  369. pinctrl-0 = <&pinctrl_system_bus>;
  370. };
  371. smpctrl@59801000 {
  372. compatible = "socionext,uniphier-smpctrl";
  373. reg = <0x59801000 0x400>;
  374. };
  375. syscon@59810000 {
  376. compatible = "socionext,uniphier-ld11-sdctrl",
  377. "simple-mfd", "syscon";
  378. reg = <0x59810000 0x400>;
  379. sd_rst: reset-controller {
  380. compatible = "socionext,uniphier-ld11-sd-reset";
  381. #reset-cells = <1>;
  382. };
  383. };
  384. syscon@59820000 {
  385. compatible = "socionext,uniphier-ld11-perictrl",
  386. "simple-mfd", "syscon";
  387. reg = <0x59820000 0x200>;
  388. peri_clk: clock-controller {
  389. compatible = "socionext,uniphier-ld11-peri-clock";
  390. #clock-cells = <1>;
  391. };
  392. peri_rst: reset-controller {
  393. compatible = "socionext,uniphier-ld11-peri-reset";
  394. #reset-cells = <1>;
  395. };
  396. };
  397. emmc: mmc@5a000000 {
  398. compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
  399. reg = <0x5a000000 0x400>;
  400. interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
  401. pinctrl-names = "default";
  402. pinctrl-0 = <&pinctrl_emmc>;
  403. clocks = <&sys_clk 4>;
  404. resets = <&sys_rst 4>;
  405. bus-width = <8>;
  406. mmc-ddr-1_8v;
  407. mmc-hs200-1_8v;
  408. mmc-pwrseq = <&emmc_pwrseq>;
  409. cdns,phy-input-delay-legacy = <9>;
  410. cdns,phy-input-delay-mmc-highspeed = <2>;
  411. cdns,phy-input-delay-mmc-ddr = <3>;
  412. cdns,phy-dll-delay-sdclk = <21>;
  413. cdns,phy-dll-delay-sdclk-hsmmc = <21>;
  414. };
  415. usb0: usb@5a800100 {
  416. compatible = "socionext,uniphier-ehci", "generic-ehci";
  417. status = "disabled";
  418. reg = <0x5a800100 0x100>;
  419. interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
  420. pinctrl-names = "default";
  421. pinctrl-0 = <&pinctrl_usb0>;
  422. clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 8>,
  423. <&mio_clk 12>;
  424. resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>,
  425. <&mio_rst 12>;
  426. phy-names = "usb";
  427. phys = <&usb_phy0>;
  428. has-transaction-translator;
  429. };
  430. usb1: usb@5a810100 {
  431. compatible = "socionext,uniphier-ehci", "generic-ehci";
  432. status = "disabled";
  433. reg = <0x5a810100 0x100>;
  434. interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
  435. pinctrl-names = "default";
  436. pinctrl-0 = <&pinctrl_usb1>;
  437. clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 9>,
  438. <&mio_clk 13>;
  439. resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>,
  440. <&mio_rst 13>;
  441. phy-names = "usb";
  442. phys = <&usb_phy1>;
  443. has-transaction-translator;
  444. };
  445. usb2: usb@5a820100 {
  446. compatible = "socionext,uniphier-ehci", "generic-ehci";
  447. status = "disabled";
  448. reg = <0x5a820100 0x100>;
  449. interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>;
  450. pinctrl-names = "default";
  451. pinctrl-0 = <&pinctrl_usb2>;
  452. clocks = <&sys_clk 8>, <&mio_clk 7>, <&mio_clk 10>,
  453. <&mio_clk 14>;
  454. resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>,
  455. <&mio_rst 14>;
  456. phy-names = "usb";
  457. phys = <&usb_phy2>;
  458. has-transaction-translator;
  459. };
  460. syscon@5b3e0000 {
  461. compatible = "socionext,uniphier-ld11-mioctrl",
  462. "simple-mfd", "syscon";
  463. reg = <0x5b3e0000 0x800>;
  464. mio_clk: clock-controller {
  465. compatible = "socionext,uniphier-ld11-mio-clock";
  466. #clock-cells = <1>;
  467. };
  468. mio_rst: reset-controller {
  469. compatible = "socionext,uniphier-ld11-mio-reset";
  470. #reset-cells = <1>;
  471. resets = <&sys_rst 7>;
  472. };
  473. };
  474. soc_glue: syscon@5f800000 {
  475. compatible = "socionext,uniphier-ld11-soc-glue",
  476. "simple-mfd", "syscon";
  477. reg = <0x5f800000 0x2000>;
  478. pinctrl: pinctrl {
  479. compatible = "socionext,uniphier-ld11-pinctrl";
  480. };
  481. usb-hub {
  482. compatible = "socionext,uniphier-ld11-usb2-phy";
  483. #address-cells = <1>;
  484. #size-cells = <0>;
  485. usb_phy0: phy@0 {
  486. reg = <0>;
  487. #phy-cells = <0>;
  488. };
  489. usb_phy1: phy@1 {
  490. reg = <1>;
  491. #phy-cells = <0>;
  492. };
  493. usb_phy2: phy@2 {
  494. reg = <2>;
  495. #phy-cells = <0>;
  496. };
  497. };
  498. };
  499. syscon@5f900000 {
  500. compatible = "socionext,uniphier-ld11-soc-glue-debug",
  501. "simple-mfd", "syscon";
  502. reg = <0x5f900000 0x2000>;
  503. #address-cells = <1>;
  504. #size-cells = <1>;
  505. ranges = <0 0x5f900000 0x2000>;
  506. efuse@100 {
  507. compatible = "socionext,uniphier-efuse";
  508. reg = <0x100 0x28>;
  509. };
  510. efuse@200 {
  511. compatible = "socionext,uniphier-efuse";
  512. reg = <0x200 0x68>;
  513. };
  514. };
  515. xdmac: dma-controller@5fc10000 {
  516. compatible = "socionext,uniphier-xdmac";
  517. reg = <0x5fc10000 0x5300>;
  518. interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
  519. dma-channels = <16>;
  520. #dma-cells = <2>;
  521. };
  522. aidet: interrupt-controller@5fc20000 {
  523. compatible = "socionext,uniphier-ld11-aidet";
  524. reg = <0x5fc20000 0x200>;
  525. interrupt-controller;
  526. #interrupt-cells = <2>;
  527. };
  528. gic: interrupt-controller@5fe00000 {
  529. compatible = "arm,gic-v3";
  530. reg = <0x5fe00000 0x10000>, /* GICD */
  531. <0x5fe40000 0x80000>; /* GICR */
  532. interrupt-controller;
  533. #interrupt-cells = <3>;
  534. interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
  535. };
  536. syscon@61840000 {
  537. compatible = "socionext,uniphier-ld11-sysctrl",
  538. "simple-mfd", "syscon";
  539. reg = <0x61840000 0x10000>;
  540. sys_clk: clock-controller {
  541. compatible = "socionext,uniphier-ld11-clock";
  542. #clock-cells = <1>;
  543. };
  544. sys_rst: reset-controller {
  545. compatible = "socionext,uniphier-ld11-reset";
  546. #reset-cells = <1>;
  547. };
  548. watchdog {
  549. compatible = "socionext,uniphier-wdt";
  550. };
  551. };
  552. eth: ethernet@65000000 {
  553. compatible = "socionext,uniphier-ld11-ave4";
  554. status = "disabled";
  555. reg = <0x65000000 0x8500>;
  556. interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
  557. clock-names = "ether";
  558. clocks = <&sys_clk 6>;
  559. reset-names = "ether";
  560. resets = <&sys_rst 6>;
  561. phy-mode = "internal";
  562. local-mac-address = [00 00 00 00 00 00];
  563. socionext,syscon-phy-mode = <&soc_glue 0>;
  564. mdio: mdio {
  565. #address-cells = <1>;
  566. #size-cells = <0>;
  567. };
  568. };
  569. nand: nand-controller@68000000 {
  570. compatible = "socionext,uniphier-denali-nand-v5b";
  571. status = "disabled";
  572. reg-names = "nand_data", "denali_reg";
  573. reg = <0x68000000 0x20>, <0x68100000 0x1000>;
  574. #address-cells = <1>;
  575. #size-cells = <0>;
  576. interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
  577. pinctrl-names = "default";
  578. pinctrl-0 = <&pinctrl_nand>;
  579. clock-names = "nand", "nand_x", "ecc";
  580. clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
  581. reset-names = "nand", "reg";
  582. resets = <&sys_rst 2>, <&sys_rst 2>;
  583. };
  584. };
  585. };
  586. #include "uniphier-pinctrl.dtsi"
  587. &pinctrl_aoutiec1 {
  588. drive-strength = <4>; /* default: 4mA */
  589. ao1arc {
  590. pins = "AO1ARC";
  591. drive-strength = <8>; /* 8mA */
  592. };
  593. };