| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586878889 |
- # All needed files would be added to _HAL_INTFS_FILES, and it would include
- # hal/hal_halmac.c and all related files in directory hal/halmac/.
- # Before include this makefile, be sure interface (CONFIG_*_HCI) and IC
- # (CONFIG_RTL*) setting are all ready!
- # Base directory
- path_hm := hal/halmac
- ifeq ($(CONFIG_PCI_HCI), y)
- pci := y
- endif
- ifeq ($(CONFIG_SDIO_HCI), y)
- sdio := y
- endif
- ifeq ($(CONFIG_USB_HCI), y)
- usb := y
- endif
- ifeq ($(CONFIG_RTL8822B), y)
- series := 88xx
- ic := 8822b
- endif
- ifeq ($(CONFIG_RTL8822C), y)
- series := 88xx
- ic := 8822c
- endif
- ifeq ($(CONFIG_RTL8822E), y)
- series := 88xx
- ic := 8822e
- d2efuse := y
- endif
- ifeq ($(CONFIG_RTL8821C), y)
- series := 88xx
- ic := 8821c
- endif
- ifeq ($(CONFIG_RTL8814B), y)
- series := 88xx_v1
- ic := 8814b
- endif
- ifeq ($(CONFIG_RTL8822E), y)
- series := 88xx
- ic := 8822e
- endif
- ifeq ($(series), 88xx_v1)
- d2all :=
- else
- d2all := y
- endif
- halmac-y += $(path_hm)/halmac_api.o
- halmac-y += $(path_hm)/halmac_dbg.o
- # Level 1 directory
- path_hm_d1 := $(path_hm)/halmac_$(series)
- halmac-y += $(path_hm_d1)/halmac_bb_rf_$(series).o \
- $(path_hm_d1)/halmac_cfg_wmac_$(series).o \
- $(path_hm_d1)/halmac_common_$(series).o \
- $(path_hm_d1)/halmac_efuse_$(series).o \
- $(path_hm_d1)/halmac_flash_$(series).o \
- $(path_hm_d1)/halmac_fw_$(series).o \
- $(path_hm_d1)/halmac_gpio_$(series).o \
- $(path_hm_d1)/halmac_init_$(series).o \
- $(path_hm_d1)/halmac_mimo_$(series).o
- halmac-$(pci) += $(path_hm_d1)/halmac_pcie_$(series).o
- halmac-$(sdio) += $(path_hm_d1)/halmac_sdio_$(series).o
- halmac-$(usb) += $(path_hm_d1)/halmac_usb_$(series).o
- # Level 2 directory
- path_hm_d2 := $(path_hm_d1)/halmac_$(ic)
- halmac-$(d2all) += $(path_hm_d2)/halmac_cfg_wmac_$(ic).o \
- $(path_hm_d2)/halmac_common_$(ic).o
- halmac-y += $(path_hm_d2)/halmac_gpio_$(ic).o \
- $(path_hm_d2)/halmac_init_$(ic).o \
- $(path_hm_d2)/halmac_phy_$(ic).o \
- $(path_hm_d2)/halmac_pwr_seq_$(ic).o
- halmac-$(d2efuse) += $(path_hm_d2)/halmac_efuse_$(ic).o
- halmac-$(pci) += $(path_hm_d2)/halmac_pcie_$(ic).o
- halmac-$(sdio) += $(path_hm_d2)/halmac_sdio_$(ic).o
- halmac-$(usb) += $(path_hm_d2)/halmac_usb_$(ic).o
- _HAL_INTFS_FILES += hal/hal_halmac.o
- _HAL_INTFS_FILES += $(halmac-y)
|
