ark1668ed-bsp/linux/drivers/remoteproc/Kconfig

# SPDX-License-Identifier: GPL-2.0-only
menu "Remoteproc drivers"

config REMOTEPROC
	bool "Support for Remote Processor subsystem"
	depends on HAS_DMA
	select CRC32
	select FW_LOADER
	select VIRTIO
	select WANT_DEV_COREDUMP
	help
	  Support for remote processors (such as DSP coprocessors). These
	  are mainly used on embedded systems.

if REMOTEPROC

config REMOTEPROC_CDEV
	bool "Remoteproc character device interface"
	help
	  Say y here to have a character device interface for the remoteproc
	  framework. Userspace can boot/shutdown remote processors through
	  this interface.

	  It's safe to say N if you don't want to use this interface.

config IMX_REMOTEPROC
	tristate "i.MX remoteproc support"
	depends on ARCH_MXC
	depends on HAVE_ARM_SMCCC
	select MAILBOX
	help
	  Say y here to support iMX's remote processors via the remote
	  processor framework.

	  It's safe to say N here.

config IMX_DSP_REMOTEPROC
	tristate "i.MX DSP remoteproc support"
	depends on ARCH_MXC
	depends on HAVE_ARM_SMCCC
	select MAILBOX
	help
	  Say y here to support iMX's DSP remote processors via the remote
	  processor framework.

	  It's safe to say N here.

config INGENIC_VPU_RPROC
	tristate "Ingenic JZ47xx VPU remoteproc support"
	depends on MIPS || COMPILE_TEST
	help
	  Say y or m here to support the VPU in the JZ47xx SoCs from Ingenic.

	  This can be either built-in or a loadable module.
	  If unsure say N.

config MTK_SCP
	tristate "Mediatek SCP support"
	depends on ARCH_MEDIATEK || COMPILE_TEST
	select RPMSG_MTK_SCP
	help
	  Say y here to support Mediatek's System Companion Processor (SCP) via
	  the remote processor framework.

	  It's safe to say N here.

config OMAP_REMOTEPROC
	tristate "OMAP remoteproc support"
	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
	depends on OMAP_IOMMU
	select MAILBOX
	select OMAP2PLUS_MBOX
	help
	  Say y here to support OMAP's remote processors (dual M3
	  and DSP on OMAP4) via the remote processor framework.

	  Currently only supported on OMAP4.

	  Usually you want to say Y here, in order to enable multimedia
	  use-cases to run on your platform (multimedia codecs are
	  offloaded to remote DSP processors using this framework).

	  It's safe to say N here if you're not interested in multimedia
	  offloading or just want a bare minimum kernel.

config OMAP_REMOTEPROC_WATCHDOG
	bool "OMAP remoteproc watchdog timer"
	depends on OMAP_REMOTEPROC
	default n
	help
	  Say Y here to enable watchdog timer for remote processors.

	  This option controls the watchdog functionality for the remote
	  processors in OMAP. Dedicated OMAP DMTimers are used by the remote
	  processors and triggers the timer interrupt upon a watchdog
	  detection.

config WKUP_M3_RPROC
	tristate "AMx3xx Wakeup M3 remoteproc support"
	depends on SOC_AM33XX || SOC_AM43XX
	help
	  Say y here to support Wakeup M3 remote processor on TI AM33xx
	  and AM43xx family of SoCs.

	  Required for Suspend-to-RAM on AM33xx and AM43xx SoCs. Also needed
	  for deep CPUIdle states on AM33xx SoCs. Allows for loading of the
	  firmware onto these remote processors.
	  If unsure say N.

config DA8XX_REMOTEPROC
	tristate "DA8xx/OMAP-L13x remoteproc support"
	depends on ARCH_DAVINCI_DA8XX
	depends on DMA_CMA
	help
	  Say y here to support DA8xx/OMAP-L13x remote processors via the
	  remote processor framework.

	  You want to say y here in order to enable AMP
	  use-cases to run on your platform (multimedia codecs are
	  offloaded to remote DSP processors using this framework).

	  This module controls the name of the firmware file that gets
	  loaded on the DSP.  This file must reside in the /lib/firmware
	  directory.  It can be specified via the module parameter
	  da8xx_fw_name=<filename>, and if not specified will default to
	  "rproc-dsp-fw".

	  It's safe to say n here if you're not interested in multimedia
	  offloading.

config KEYSTONE_REMOTEPROC
	tristate "Keystone Remoteproc support"
	depends on ARCH_KEYSTONE
	help
	  Say Y here here to support Keystone remote processors (DSP)
	  via the remote processor framework.

	  It's safe to say N here if you're not interested in the Keystone
	  DSPs or just want to use a bare minimum kernel.

config MESON_MX_AO_ARC_REMOTEPROC
	tristate "Amlogic Meson6/8/8b/8m2 AO ARC remote processor support"
	depends on HAS_IOMEM
	depends on (ARM && ARCH_MESON) || COMPILE_TEST
	select GENERIC_ALLOCATOR
	help
	  Say m or y here to have support for the AO ARC remote processor
	  on Amlogic Meson6/Meson8/Meson8b/Meson8m2 SoCs. This is
	  typically used for system suspend.
	  If unsure say N.

config PRU_REMOTEPROC
	tristate "TI PRU remoteproc support"
	depends on TI_PRUSS
	default TI_PRUSS
	help
	  Support for TI PRU remote processors present within a PRU-ICSS
	  subsystem via the remote processor framework.

	  Say Y or M here to support the Programmable Realtime Unit (PRU)
	  processors on various TI SoCs. It's safe to say N here if you're
	  not interested in the PRU or if you are unsure.

config QCOM_PIL_INFO
	tristate

config QCOM_RPROC_COMMON
	tristate
	select AUXILIARY_BUS

config QCOM_Q6V5_COMMON
	tristate
	depends on ARCH_QCOM
	depends on QCOM_SMEM

config QCOM_Q6V5_ADSP
	tristate "Qualcomm Technology Inc ADSP Peripheral Image Loader"
	depends on OF && ARCH_QCOM
	depends on QCOM_SMEM
	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
	depends on QCOM_SYSMON || QCOM_SYSMON=n
	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
	select MFD_SYSCON
	select QCOM_PIL_INFO
	select QCOM_MDT_LOADER
	select QCOM_Q6V5_COMMON
	select QCOM_RPROC_COMMON
	help
	  Say y here to support the Peripheral Image Loader
	  for the non-TrustZone part of Qualcomm Technology Inc. ADSP and CDSP
	  remote processors. The TrustZone part is handled by QCOM_Q6V5_PAS
	  driver.

config QCOM_Q6V5_MSS
	tristate "Qualcomm Hexagon V5 self-authenticating modem subsystem support"
	depends on OF && ARCH_QCOM
	depends on QCOM_SMEM
	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
	depends on QCOM_SYSMON || QCOM_SYSMON=n
	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
	select MFD_SYSCON
	select QCOM_MDT_LOADER
	select QCOM_PIL_INFO
	select QCOM_Q6V5_COMMON
	select QCOM_RPROC_COMMON
	select QCOM_SCM
	help
	  Say y here to support the Qualcomm self-authenticating modem
	  subsystem based on Hexagon V5. The TrustZone based system is
	  handled by QCOM_Q6V5_PAS driver.

config QCOM_Q6V5_PAS
	tristate "Qualcomm Hexagon v5 Peripheral Authentication Service support"
	depends on OF && ARCH_QCOM
	depends on QCOM_SMEM
	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
	depends on QCOM_SYSMON || QCOM_SYSMON=n
	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
	select MFD_SYSCON
	select QCOM_PIL_INFO
	select QCOM_MDT_LOADER
	select QCOM_Q6V5_COMMON
	select QCOM_RPROC_COMMON
	select QCOM_SCM
	help
	  Say y here to support the TrustZone based Peripheral Image Loader
	  for the Qualcomm Hexagon v5 based remote processors. This is commonly
	  used to control subsystems such as ADSP (Audio DSP),
	  CDSP (Compute DSP), MPSS (Modem Peripheral SubSystem), and
	  SLPI (Sensor Low Power Island).

config QCOM_Q6V5_WCSS
	tristate "Qualcomm Hexagon based WCSS Peripheral Image Loader"
	depends on OF && ARCH_QCOM
	depends on QCOM_SMEM
	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
	depends on QCOM_SYSMON || QCOM_SYSMON=n
	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
	depends on QCOM_AOSS_QMP || QCOM_AOSS_QMP=n
	select MFD_SYSCON
	select QCOM_MDT_LOADER
	select QCOM_PIL_INFO
	select QCOM_Q6V5_COMMON
	select QCOM_RPROC_COMMON
	select QCOM_SCM
	help
	  Say y here to support the Qualcomm Peripheral Image Loader for the
	  Hexagon V5 based WCSS remote processors on e.g. IPQ8074.  This is
	  a non-TrustZone wireless subsystem.

config QCOM_SYSMON
	tristate "Qualcomm sysmon driver"
	depends on RPMSG
	depends on ARCH_QCOM
	depends on NET
	select QCOM_QMI_HELPERS
	help
	  The sysmon driver implements a sysmon QMI client and a handler for
	  the sys_mon SMD and GLINK channel, which are used for graceful
	  shutdown, retrieving failure information and propagating information
	  about other subsystems being shut down.

	  Say y here if your system runs firmware on any other subsystems, e.g.
	  modem or DSP.

config QCOM_WCNSS_PIL
	tristate "Qualcomm WCNSS Peripheral Image Loader"
	depends on OF && ARCH_QCOM
	depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n
	depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
	depends on QCOM_SMEM
	depends on QCOM_SYSMON || QCOM_SYSMON=n
	depends on RPMSG_QCOM_GLINK || RPMSG_QCOM_GLINK=n
	select QCOM_MDT_LOADER
	select QCOM_PIL_INFO
	select QCOM_RPROC_COMMON
	select QCOM_SCM
	help
	  Say y here to support the Peripheral Image Loader for loading WCNSS
	  firmware and boot the core on e.g. MSM8974, MSM8916. The firmware is
	  verified and booted with the help of the Peripheral Authentication
	  System (PAS) in TrustZone.

config RCAR_REMOTEPROC
	tristate "Renesas R-Car Gen3 remoteproc support"
	depends on ARCH_RENESAS || COMPILE_TEST
	help
	  Say y here to support R-Car realtime processor via the
	  remote processor framework. An ELF firmware can be loaded
	  thanks to sysfs remoteproc entries. The remote processor
	  can be started and stopped.
	  This can be either built-in or a loadable module.
	  If compiled as module (M), the module name is rcar_rproc.

config ST_REMOTEPROC
	tristate "ST remoteproc support"
	depends on ARCH_STI
	select MAILBOX
	select STI_MBOX
	help
	  Say y here to support ST's adjunct processors via the remote
	  processor framework.
	  This can be either built-in or a loadable module.

config ST_SLIM_REMOTEPROC
	tristate

config STM32_RPROC
	tristate "STM32 remoteproc support"
	depends on ARCH_STM32 || COMPILE_TEST
	depends on REMOTEPROC
	select MAILBOX
	help
	  Say y here to support STM32 MCU processors via the
	  remote processor framework.

	  You want to say y here in order to enable AMP
	  use-cases to run on your platform (dedicated firmware could be
	  offloaded to remote MCU processors using this framework).

	  This can be either built-in or a loadable module.

config TI_K3_DSP_REMOTEPROC
	tristate "TI K3 DSP remoteproc support"
	depends on ARCH_K3
	depends on OMAP2PLUS_MBOX
	help
	  Say m here to support TI's C66x and C71x DSP remote processor
	  subsystems on various TI K3 family of SoCs through the remote
	  processor framework.

	  It's safe to say N here if you're not interested in utilizing
	  the DSP slave processors.

config TI_K3_M4_REMOTEPROC
	tristate "TI K3 M4 remoteproc support"
	depends on ARCH_K3 || COMPILE_TEST
	depends on TI_SCI_PROTOCOL || (COMPILE_TEST && TI_SCI_PROTOCOL=n)
	depends on OMAP2PLUS_MBOX
	help
	  Say m here to support TI's M4 remote processor subsystems
	  on various TI K3 family of SoCs through the remote processor
	  framework.

	  It's safe to say N here if you're not interested in utilizing
	  a remote processor.

config TI_K3_R5_REMOTEPROC
	tristate "TI K3 R5 remoteproc support"
	depends on ARCH_K3
	depends on OMAP2PLUS_MBOX
	help
	  Say m here to support TI's R5F remote processor subsystems
	  on various TI K3 family of SoCs through the remote processor
	  framework.

	  It's safe to say N here if you're not interested in utilizing
	  a slave processor.

config XLNX_R5_REMOTEPROC
	tristate "Xilinx R5 remoteproc support"
	depends on PM && ARCH_ZYNQMP
	select ZYNQMP_FIRMWARE
	select RPMSG_VIRTIO
	select MAILBOX
	select ZYNQMP_IPI_MBOX
	help
	  Say y or m here to support Xilinx R5 remote processors via the remote
	  processor framework.

	  It's safe to say N if not interested in using RPU r5f cores.

endif # REMOTEPROC

endmenu