| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298 |
- // SPDX-License-Identifier: GPL-2.0-or-later
- /*
- * OP-TEE STM32MP BSEC PTA interface, used by STM32 ROMEM driver
- *
- * Copyright (C) 2022, STMicroelectronics - All Rights Reserved
- */
- #include <linux/tee_drv.h>
- #include "stm32-bsec-optee-ta.h"
- /*
- * Read OTP memory
- *
- * [in] value[0].a OTP start offset in byte
- * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
- * [out] memref[1].buffer Output buffer to store read values
- * [out] memref[1].size Size of OTP to be read
- *
- * Return codes:
- * TEE_SUCCESS - Invoke command success
- * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
- * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
- */
- #define PTA_BSEC_READ_MEM 0x0
- /*
- * Write OTP memory
- *
- * [in] value[0].a OTP start offset in byte
- * [in] value[0].b Access type (0:shadow, 1:fuse, 2:lock)
- * [in] memref[1].buffer Input buffer to read values
- * [in] memref[1].size Size of OTP to be written
- *
- * Return codes:
- * TEE_SUCCESS - Invoke command success
- * TEE_ERROR_BAD_PARAMETERS - Incorrect input param
- * TEE_ERROR_ACCESS_DENIED - OTP not accessible by caller
- */
- #define PTA_BSEC_WRITE_MEM 0x1
- /* value of PTA_BSEC access type = value[in] b */
- #define SHADOW_ACCESS 0
- #define FUSE_ACCESS 1
- #define LOCK_ACCESS 2
- /* Bitfield definition for LOCK status */
- #define LOCK_PERM BIT(30)
- /* OP-TEE STM32MP BSEC TA UUID */
- static const uuid_t stm32mp_bsec_ta_uuid =
- UUID_INIT(0x94cf71ad, 0x80e6, 0x40b5,
- 0xa7, 0xc6, 0x3d, 0xc5, 0x01, 0xeb, 0x28, 0x03);
- /*
- * Check whether this driver supports the BSEC TA in the TEE instance
- * represented by the params (ver/data) to this function.
- */
- static int stm32_bsec_optee_ta_match(struct tee_ioctl_version_data *ver,
- const void *data)
- {
- /* Currently this driver only supports GP compliant, OP-TEE based TA */
- if ((ver->impl_id == TEE_IMPL_ID_OPTEE) &&
- (ver->gen_caps & TEE_GEN_CAP_GP))
- return 1;
- else
- return 0;
- }
- /* Open a session to OP-TEE for STM32MP BSEC TA */
- static int stm32_bsec_ta_open_session(struct tee_context *ctx, u32 *id)
- {
- struct tee_ioctl_open_session_arg sess_arg;
- int rc;
- memset(&sess_arg, 0, sizeof(sess_arg));
- export_uuid(sess_arg.uuid, &stm32mp_bsec_ta_uuid);
- sess_arg.clnt_login = TEE_IOCTL_LOGIN_REE_KERNEL;
- sess_arg.num_params = 0;
- rc = tee_client_open_session(ctx, &sess_arg, NULL);
- if ((rc < 0) || (sess_arg.ret != 0)) {
- pr_err("%s: tee_client_open_session failed err:%#x, ret:%#x\n",
- __func__, sess_arg.ret, rc);
- if (!rc)
- rc = -EINVAL;
- } else {
- *id = sess_arg.session;
- }
- return rc;
- }
- /* close a session to OP-TEE for STM32MP BSEC TA */
- static void stm32_bsec_ta_close_session(void *ctx, u32 id)
- {
- tee_client_close_session(ctx, id);
- }
- /* stm32_bsec_optee_ta_open() - initialize the STM32MP BSEC TA */
- int stm32_bsec_optee_ta_open(struct tee_context **ctx)
- {
- struct tee_context *tee_ctx;
- u32 session_id;
- int rc;
- /* Open context with TEE driver */
- tee_ctx = tee_client_open_context(NULL, stm32_bsec_optee_ta_match, NULL, NULL);
- if (IS_ERR(tee_ctx)) {
- rc = PTR_ERR(tee_ctx);
- if (rc == -ENOENT)
- return -EPROBE_DEFER;
- pr_err("%s: tee_client_open_context failed (%d)\n", __func__, rc);
- return rc;
- }
- /* Check STM32MP BSEC TA presence */
- rc = stm32_bsec_ta_open_session(tee_ctx, &session_id);
- if (rc) {
- tee_client_close_context(tee_ctx);
- return rc;
- }
- stm32_bsec_ta_close_session(tee_ctx, session_id);
- *ctx = tee_ctx;
- return 0;
- }
- /* stm32_bsec_optee_ta_open() - release the PTA STM32MP BSEC TA */
- void stm32_bsec_optee_ta_close(void *ctx)
- {
- tee_client_close_context(ctx);
- }
- /* stm32_bsec_optee_ta_read() - nvmem read access using PTA client driver */
- int stm32_bsec_optee_ta_read(struct tee_context *ctx, unsigned int offset,
- void *buf, size_t bytes)
- {
- struct tee_shm *shm;
- struct tee_ioctl_invoke_arg arg;
- struct tee_param param[2];
- u8 *shm_buf;
- u32 start, num_bytes;
- int ret;
- u32 session_id;
- ret = stm32_bsec_ta_open_session(ctx, &session_id);
- if (ret)
- return ret;
- memset(&arg, 0, sizeof(arg));
- memset(¶m, 0, sizeof(param));
- arg.func = PTA_BSEC_READ_MEM;
- arg.session = session_id;
- arg.num_params = 2;
- /* align access on 32bits */
- start = ALIGN_DOWN(offset, 4);
- num_bytes = round_up(offset + bytes - start, 4);
- param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
- param[0].u.value.a = start;
- param[0].u.value.b = SHADOW_ACCESS;
- shm = tee_shm_alloc_kernel_buf(ctx, num_bytes);
- if (IS_ERR(shm)) {
- ret = PTR_ERR(shm);
- goto out_tee_session;
- }
- param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_OUTPUT;
- param[1].u.memref.shm = shm;
- param[1].u.memref.size = num_bytes;
- ret = tee_client_invoke_func(ctx, &arg, param);
- if (ret < 0 || arg.ret != 0) {
- pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n",
- arg.ret, ret);
- if (!ret)
- ret = -EIO;
- }
- if (!ret) {
- shm_buf = tee_shm_get_va(shm, 0);
- if (IS_ERR(shm_buf)) {
- ret = PTR_ERR(shm_buf);
- pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
- } else {
- /* read data from 32 bits aligned buffer */
- memcpy(buf, &shm_buf[offset % 4], bytes);
- }
- }
- tee_shm_free(shm);
- out_tee_session:
- stm32_bsec_ta_close_session(ctx, session_id);
- return ret;
- }
- /* stm32_bsec_optee_ta_write() - nvmem write access using PTA client driver */
- int stm32_bsec_optee_ta_write(struct tee_context *ctx, unsigned int lower,
- unsigned int offset, void *buf, size_t bytes)
- { struct tee_shm *shm;
- struct tee_ioctl_invoke_arg arg;
- struct tee_param param[2];
- u8 *shm_buf;
- int ret;
- u32 session_id;
- ret = stm32_bsec_ta_open_session(ctx, &session_id);
- if (ret)
- return ret;
- /* Allow only writing complete 32-bits aligned words */
- if ((bytes % 4) || (offset % 4))
- return -EINVAL;
- memset(&arg, 0, sizeof(arg));
- memset(¶m, 0, sizeof(param));
- arg.func = PTA_BSEC_WRITE_MEM;
- arg.session = session_id;
- arg.num_params = 2;
- param[0].attr = TEE_IOCTL_PARAM_ATTR_TYPE_VALUE_INPUT;
- param[0].u.value.a = offset;
- param[0].u.value.b = FUSE_ACCESS;
- shm = tee_shm_alloc_kernel_buf(ctx, bytes);
- if (IS_ERR(shm)) {
- ret = PTR_ERR(shm);
- goto out_tee_session;
- }
- param[1].attr = TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INPUT;
- param[1].u.memref.shm = shm;
- param[1].u.memref.size = bytes;
- shm_buf = tee_shm_get_va(shm, 0);
- if (IS_ERR(shm_buf)) {
- ret = PTR_ERR(shm_buf);
- pr_err("tee_shm_get_va failed for transmit (%d)\n", ret);
- tee_shm_free(shm);
- goto out_tee_session;
- }
- memcpy(shm_buf, buf, bytes);
- ret = tee_client_invoke_func(ctx, &arg, param);
- if (ret < 0 || arg.ret != 0) {
- pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
- if (!ret)
- ret = -EIO;
- }
- pr_debug("Write OTPs %d to %zu, ret=%d\n", offset / 4, (offset + bytes) / 4, ret);
- /* Lock the upper OTPs with ECC protection, word programming only */
- if (!ret && ((offset + bytes) >= (lower * 4))) {
- u32 start, nb_lock;
- u32 *lock = (u32 *)shm_buf;
- int i;
- /*
- * don't lock the lower OTPs, no ECC protection and incremental
- * bit programming, a second write is allowed
- */
- start = max_t(u32, offset, lower * 4);
- nb_lock = (offset + bytes - start) / 4;
- param[0].u.value.a = start;
- param[0].u.value.b = LOCK_ACCESS;
- param[1].u.memref.size = nb_lock * 4;
- for (i = 0; i < nb_lock; i++)
- lock[i] = LOCK_PERM;
- ret = tee_client_invoke_func(ctx, &arg, param);
- if (ret < 0 || arg.ret != 0) {
- pr_err("TA_BSEC invoke failed TEE err:%#x, ret:%#x\n", arg.ret, ret);
- if (!ret)
- ret = -EIO;
- }
- pr_debug("Lock upper OTPs %d to %d, ret=%d\n",
- start / 4, start / 4 + nb_lock, ret);
- }
- tee_shm_free(shm);
- out_tee_session:
- stm32_bsec_ta_close_session(ctx, session_id);
- return ret;
- }
|