| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091 |
- # SPDX-License-Identifier: GPL-2.0-only
- #
- # TI SOC drivers
- #
- menuconfig SOC_TI
- bool "TI SOC drivers support"
- if SOC_TI
- config KEYSTONE_NAVIGATOR_QMSS
- tristate "Keystone Queue Manager Sub System"
- depends on ARCH_KEYSTONE
- help
- Say y here to support the Keystone multicore Navigator Queue
- Manager support. The Queue Manager is a hardware module that
- is responsible for accelerating management of the packet queues.
- Packets are queued/de-queued by writing/reading descriptor address
- to a particular memory mapped location in the Queue Manager module.
- If unsure, say N.
- config KEYSTONE_NAVIGATOR_DMA
- tristate "TI Keystone Navigator Packet DMA support"
- depends on ARCH_KEYSTONE
- help
- Say y tp enable support for the Keystone Navigator Packet DMA on
- on Keystone family of devices. It sets up the dma channels for the
- Queue Manager Sub System.
- If unsure, say N.
- config AMX3_PM
- tristate "AMx3 Power Management"
- depends on SOC_AM33XX || SOC_AM43XX
- depends on WKUP_M3_IPC && TI_EMIF_SRAM && SRAM && RTC_DRV_OMAP
- help
- Enable power management on AM335x and AM437x. Required for suspend to mem
- and standby states on both AM335x and AM437x platforms and for deeper cpuidle
- c-states on AM335x. Also required for rtc and ddr in self-refresh low
- power mode on AM437x platforms.
- config WKUP_M3_IPC
- tristate "TI AMx3 Wkup-M3 IPC Driver"
- depends on WKUP_M3_RPROC
- depends on OMAP2PLUS_MBOX
- help
- TI AM33XX and AM43XX have a Cortex M3, the Wakeup M3, to handle
- low power transitions. This IPC driver provides the necessary API
- to communicate and use the Wakeup M3 for PM features like suspend
- resume and boots it using wkup_m3_rproc driver.
- config TI_K3_RINGACC
- tristate "K3 Ring accelerator Sub System"
- depends on ARCH_K3 || COMPILE_TEST
- depends on TI_SCI_INTA_IRQCHIP
- help
- Say y here to support the K3 Ring accelerator module.
- The Ring Accelerator (RINGACC or RA) provides hardware acceleration
- to enable straightforward passing of work between a producer
- and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs
- If unsure, say N.
- config TI_K3_SOCINFO
- bool
- depends on ARCH_K3 || COMPILE_TEST
- select SOC_BUS
- select MFD_SYSCON
- help
- Include support for the SoC bus socinfo for the TI K3 Multicore SoC
- platforms to provide information about the SoC family and
- variant to user space.
- config TI_PRUSS
- tristate "TI PRU-ICSS Subsystem Platform drivers"
- depends on SOC_AM33XX || SOC_AM43XX || SOC_DRA7XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
- select MFD_SYSCON
- help
- TI PRU-ICSS Subsystem platform specific support.
- Say Y or M here to support the Programmable Realtime Unit (PRU)
- processors on various TI SoCs. It's safe to say N here if you're
- not interested in the PRU or if you are unsure.
- endif # SOC_TI
- config TI_SCI_INTA_MSI_DOMAIN
- bool
- select GENERIC_MSI_IRQ
- help
- Driver to enable Interrupt Aggregator specific MSI Domain.
|
