| 123456789101112131415161718192021222324252627282930313233343536373839404142434445 |
- BR2_arm=y
- BR2_cortex_a72=y
- BR2_ARM_FPU_NEON_VFPV4=y
- BR2_TOOLCHAIN_BUILDROOT_CXX=y
- BR2_SYSTEM_DHCP="eth0"
- # Linux headers same as kernel, a 6.1 series
- BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_6_1=y
- BR2_LINUX_KERNEL=y
- BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
- BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,raspberrypi,linux,17f135b742c4edb340afb365873c3a574f7e16cb)/linux-17f135b742c4edb340afb365873c3a574f7e16cb.tar.gz"
- BR2_LINUX_KERNEL_DEFCONFIG="bcm2711"
- # Build the DTB from the kernel sources
- BR2_LINUX_KERNEL_DTS_SUPPORT=y
- BR2_LINUX_KERNEL_INTREE_DTS_NAME="bcm2711-rpi-4-b"
- BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
- BR2_PACKAGE_RPI_FIRMWARE=y
- BR2_PACKAGE_RPI_FIRMWARE_VARIANT_PI4=y
- BR2_PACKAGE_RPI_FIRMWARE_CONFIG_FILE="board/raspberrypi4/config_4.txt"
- # Required tools to create the SD image
- BR2_PACKAGE_HOST_DOSFSTOOLS=y
- BR2_PACKAGE_HOST_GENIMAGE=y
- BR2_PACKAGE_HOST_MTOOLS=y
- # Filesystem / image
- BR2_TARGET_ROOTFS_EXT2=y
- BR2_TARGET_ROOTFS_EXT2_4=y
- BR2_TARGET_ROOTFS_EXT2_SIZE="120M"
- # BR2_TARGET_ROOTFS_TAR is not set
- BR2_ROOTFS_POST_BUILD_SCRIPT="board/raspberrypi4/post-build.sh"
- BR2_ROOTFS_POST_IMAGE_SCRIPT="board/raspberrypi4/post-image.sh"
- # Enable compressed kernel module support
- BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
- BR2_PACKAGE_KMOD_TOOLS=y
- BR2_PACKAGE_XZ=y
- BR2_PACKAGE_KMOD=y
- BR2_PACKAGE_HOST_KMOD_XZ=y
|
