| 12345678910111213141516171819202122232425262728293031323334 |
- Texas Instuments SK-AM62 Test and Development Board
- Description
- ===========
- This configuration will build a complete image for the TI SK-AM62
- board: https://www.ti.com/tool/SK-AM62.
- How to Build
- ============
- Select the default configuration for the target:
- $ make ti_am62x_sk_defconfig
- Optional: modify the configuration:
- $ make menuconfig
- Build:
- $ make
- To copy the resultimg output image file to an SD card use dd:
- $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M
- How to Run
- ==========
- Insert the SD card into the SK-AM62 board, and power it up through the
- USB Type-C connector. The system should come up. You can use a
- micro-USB cable to connect to the connector labeled UART to
- communicate with the board.
|
