build all... make[1]: 进入目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/u-boot” GEN ./Makefile drivers/video/arkmicro/Kconfig:11:warning: defaults for choice values not supported WARNING: unmet direct dependencies detected for I2C_EDID Depends on [n]: DM_I2C [=n] Selected by [y]: - DISPLAY [=y] && DM [=y] WARNING: unmet direct dependencies detected for I2C_EDID Depends on [n]: DM_I2C [=n] Selected by [y]: - DISPLAY [=y] && DM [=y] # # configuration written to .config # make[1]: 离开目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/u-boot” make[1]: 进入目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/u-boot” GEN ./Makefile scripts/kconfig/conf --syncconfig Kconfig drivers/video/arkmicro/Kconfig:11:warning: defaults for choice values not supported WARNING: unmet direct dependencies detected for I2C_EDID Depends on [n]: DM_I2C [=n] Selected by [y]: - DISPLAY [=y] && DM [=y] WARNING: unmet direct dependencies detected for I2C_EDID Depends on [n]: DM_I2C [=n] Selected by [y]: - DISPLAY [=y] && DM [=y] CHK include/config.h CFG u-boot.cfg GEN include/autoconf.mk.dep CFG spl/u-boot.cfg GEN include/autoconf.mk GEN spl/include/autoconf.mk CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h GEN ./Makefile UPD include/generated/timestamp_autogenerated.h Using /home/wdz/workspace/E230R/ark1668e_BSP/u-boot as source for U-Boot CHK include/generated/version_autogenerated.h CHK include/generated/generic-asm-offsets.h CHK include/generated/asm-offsets.h HOSTCC tools/mkenvimage.o HOSTCC tools/fit_image.o HOSTCC tools/image-host.o HOSTCC tools/dumpimage.o HOSTCC tools/mkimage.o CHK include/config.h CFG u-boot.cfg HOSTLD tools/mkenvimage HOSTLD tools/dumpimage HOSTLD tools/mkimage CC cmd/version.o CC common/main.o LD cmd/built-in.o LD common/built-in.o CC lib/smbios.o CC lib/display_options.o CC lib/efi_loader/efi_reloc.o CC lib/efi_loader/helloworld.o LD lib/efi_loader/helloworld_efi.so OBJCOPY lib/efi_loader/helloworld.efi rm lib/efi_loader/helloworld_efi.so lib/efi_loader/helloworld.o LD lib/built-in.o LD u-boot OBJCOPY u-boot.srec OBJCOPY u-boot-nodtb.bin SYM u-boot.sym make[3]: “arch/arm/dts/ark1668e_devb_emmc.dtb”已是最新。 CAT u-boot-dtb.bin COPY u-boot.bin MKIMAGE u-boot.img MKIMAGE u-boot-dtb.img CC spl/common/spl/spl.o CC spl/lib/display_options.o LD spl/common/spl/built-in.o LD spl/lib/built-in.o LD spl/u-boot-spl OBJCOPY spl/u-boot-spl-nodtb.bin COPY spl/u-boot-spl.bin CFGCHK u-boot.cfg make[1]: 离开目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/u-boot” make[1]: 进入目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/u-boot” CHK include/config/uboot.release CHK include/generated/timestamp_autogenerated.h UPD include/generated/timestamp_autogenerated.h CHK include/generated/version_autogenerated.h HOSTCC tools/env/fw_env_main.o HOSTLD tools/env/fw_printenv STRIP tools/env/fw_printenv make[1]: 离开目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/u-boot” make[1]: 进入目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/linux” GEN ./Makefile # # configuration written to .config # make[1]: 离开目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/linux” make[1]: 进入目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/linux” GEN ./Makefile scripts/kconfig/conf --syncconfig Kconfig GEN ./Makefile Using /home/wdz/workspace/E230R/ark1668e_BSP/linux as source for kernel CALL /home/wdz/workspace/E230R/ark1668e_BSP/linux/scripts/checksyscalls.sh CHK include/generated/compile.h DTC arch/arm/boot/dts/ark1668e_devb.dtb DTC arch/arm/boot/dts/ark1668e_devb_emmc.dtb CC sound/soc/arkmicro/ark1668e_i2s.o CC drivers/media/platform/arkmicro/ark1668e_vin.o CC drivers/gpu/arm/mali/linux/mali_osk_atomics.o CC drivers/gpu/arm/mali/linux/mali_osk_irq.o CC drivers/gpu/arm/mali/linux/mali_osk_wq.o CC drivers/gpu/arm/mali/linux/mali_osk_locks.o CC drivers/soc/arkmicro/carback/ark1668e_carback.o CC drivers/soc/arkmicro/carback/ark_track.o CC drivers/soc/arkmicro/carback/ark_mcu.o CC drivers/gpu/arm/mali/linux/mali_osk_wait_queue.o CC drivers/gpu/arm/mali/linux/mali_osk_low_level_mem.o CC drivers/gpu/arm/mali/linux/mali_osk_math.o CC drivers/gpu/arm/mali/linux/mali_osk_memory.o /home/wdz/workspace/E230R/ark1668e_BSP/linux/drivers/soc/arkmicro/carback/ark_track.c:1251:21: 警告： ‘subjoin_append1_pic’ defined but not used [-Wunused-function] static unsigned int subjoin_append1_pic(void *dest) ^~~~~~~~~~~~~~~~~~~ CC drivers/gpu/arm/mali/linux/mali_osk_misc.o CC drivers/gpu/arm/mali/linux/mali_osk_mali.o CC drivers/gpu/arm/mali/linux/mali_osk_notification.o CC drivers/gpu/arm/mali/linux/mali_osk_time.o CC drivers/gpu/arm/mali/linux/mali_osk_timers.o CC drivers/gpu/arm/mali/linux/mali_memory.o CC drivers/gpu/arm/mali/linux/mali_memory_os_alloc.o CC drivers/gpu/arm/mali/linux/mali_memory_external.o CC drivers/gpu/arm/mali/linux/mali_memory_block_alloc.o CC drivers/gpu/arm/mali/linux/mali_ukk_mem.o CC drivers/gpu/arm/mali/linux/mali_ukk_gp.o CC drivers/gpu/arm/mali/linux/mali_ukk_pp.o AR sound/soc/arkmicro/built-in.a CC drivers/gpu/arm/mali/linux/mali_ukk_core.o AR sound/soc/built-in.a CC drivers/gpu/arm/mali/linux/mali_ukk_soft_job.o CC drivers/gpu/arm/mali/linux/mali_ukk_timeline.o CC drivers/gpu/arm/mali/common/mali_kernel_core.o AR sound/built-in.a CC drivers/gpu/arm/mali/linux/mali_kernel_linux.o CC drivers/gpu/arm/mali/common/mali_kernel_descriptor_mapping.o CC drivers/gpu/arm/mali/common/mali_session.o CC drivers/gpu/arm/mali/linux/mali_device_pause_resume.o CC drivers/gpu/arm/mali/common/mali_kernel_vsync.o CC drivers/gpu/arm/mali/linux/mali_ukk_vsync.o AR drivers/media/platform/arkmicro/built-in.a AR drivers/media/platform/built-in.a CC drivers/gpu/arm/mali/linux/mali_kernel_sysfs.o CC drivers/gpu/arm/mali/common/mali_mmu.o CC drivers/gpu/arm/mali/common/mali_mmu_page_directory.o CC drivers/gpu/arm/mali/common/mali_mem_validation.o AR drivers/media/built-in.a /home/wdz/workspace/E230R/ark1668e_BSP/linux/drivers/gpu/arm/mali/common/mali_kernel_core.c:915:28: 警告： ‘mali_init_hw_reset’ defined but not used [-Wunused-function] static _mali_osk_errcode_t mali_init_hw_reset(void) ^~~~~~~~~~~~~~~~~~ /home/wdz/workspace/E230R/ark1668e_BSP/linux/drivers/gpu/arm/mali/common/mali_kernel_core.c:189:13: 警告： ‘mali_resource_count’ defined but not used [-Wunused-function] static void mali_resource_count(u32 *pp_count, u32 *l2_count) ^~~~~~~~~~~~~~~~~~~ CC drivers/gpu/arm/mali/common/mali_hw_core.o CC drivers/gpu/arm/mali/common/mali_gp.o AR drivers/soc/arkmicro/carback/built-in.a AR drivers/soc/arkmicro/built-in.a CC drivers/gpu/arm/mali/common/mali_pp.o CC drivers/gpu/arm/mali/common/mali_pp_job.o CC drivers/gpu/arm/mali/common/mali_gp_job.o AR drivers/soc/built-in.a CC drivers/gpu/arm/mali/common/mali_soft_job.o CC drivers/gpu/arm/mali/common/mali_scheduler.o CC drivers/gpu/arm/mali/common/mali_gp_scheduler.o CC drivers/gpu/arm/mali/common/mali_pp_scheduler.o CC drivers/gpu/arm/mali/common/mali_group.o CC drivers/gpu/arm/mali/common/mali_dlbu.o CC drivers/gpu/arm/mali/common/mali_broadcast.o CC drivers/gpu/arm/mali/common/mali_pm.o CC drivers/gpu/arm/mali/common/mali_pmu.o CC drivers/gpu/arm/mali/common/mali_user_settings_db.o CC drivers/gpu/arm/mali/common/mali_kernel_utilization.o CC drivers/gpu/arm/mali/common/mali_l2_cache.o CC drivers/gpu/arm/mali/common/mali_dma.o CC drivers/gpu/arm/mali/common/mali_timeline.o CC drivers/gpu/arm/mali/common/mali_timeline_fence_wait.o CC drivers/gpu/arm/mali/common/mali_timeline_sync_fence.o CC drivers/gpu/arm/mali/common/mali_spinlock_reentrant.o CC drivers/gpu/arm/mali/common/mali_pm_domain.o CC drivers/gpu/arm/mali/linux/mali_osk_pm.o CC drivers/gpu/arm/mali/linux/mali_pmu_power_up_down.o CC drivers/gpu/arm/mali/__malidrv_build_info.o CC drivers/gpu/arm/mali/platform/arm/arm.o CC drivers/gpu/arm/mali/platform/arm/arm_core_scaling.o CC drivers/gpu/arm/mali/linux/mali_memory_dma_buf.o /home/wdz/workspace/E230R/ark1668e_BSP/linux/drivers/gpu/arm/mali/platform/arm/arm.c:327:12: 警告： ‘mali_read_phys’ defined but not used [-Wunused-function] static u32 mali_read_phys(u32 phys_addr) ^~~~~~~~~~~~~~ AR drivers/gpu/arm/mali/built-in.a AR drivers/gpu/built-in.a AR drivers/built-in.a GEN .version CHK include/generated/compile.h UPD include/generated/compile.h CC init/version.o AR init/built-in.a AR built-in.a LD vmlinux.o MODPOST vmlinux.o KSYM .tmp_kallsyms1.o KSYM .tmp_kallsyms2.o LD vmlinux SORTEX vmlinux SYSMAP System.map OBJCOPY arch/arm/boot/Image Building modules, stage 2. MODPOST 3 modules Kernel: arch/arm/boot/Image is ready LZO arch/arm/boot/compressed/piggy_data AS arch/arm/boot/compressed/piggy.o LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready make[1]: 离开目录“/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/linux” GEN /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/Makefile # # configuration written to /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/.config # /usr/bin/make -j1 O=/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot HOSTCC="/usr/bin/gcc" HOSTCXX="/usr/bin/g++" syncconfig make[2]: warning: -j1 forced in submake: resetting jobserver mode. GEN /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/Makefile >>> Finalizing host directory >>> Finalizing target directory mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/etc/meson sed -e 's%@TARGET_CROSS@%/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin/arm-linux-gnueabihf-%g' -e 's%@TARGET_ARCH@%arm%g' -e 's%@TARGET_CPU@%cortex-a7%g' -e 's%@TARGET_ENDIAN@%little%g' -e "s%@TARGET_CFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_LDFLAGS@%@PKG_TARGET_CFLAGS@%g" -e "s%@TARGET_CXXFLAGS@%'-D_LARGEFILE_SOURCE', '-D_LARGEFILE64_SOURCE', '-D_FILE_OFFSET_BITS=64', '-Os'@PKG_TARGET_CFLAGS@%g" -e 's%@HOST_DIR@%/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host%g' -e 's%@STAGING_DIR@%/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/arm-buildroot-linux-gnueabihf/sysroot%g' -e 's%@STATIC@%false%g' package/meson//cross-compilation.conf.in > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/etc/meson/cross-compilation.conf.in sed -e 's%@PKG_TARGET_CFLAGS@%%g' -e 's%@PKG_TARGET_LDFLAGS@%%g' -e 's%@PKG_TARGET_CXXFLAGS@%%g' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/etc/meson/cross-compilation.conf.in > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/etc/meson/cross-compilation.conf /usr/bin/sed -i -e '/# GENERIC_SERIAL$/s~^.*#~#ttyS0::respawn:/sbin/getty -L ttyS0 115200 vt100 #~' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/inittab /usr/bin/sed -i -e '/^[^#].*-o remount,rw \/$/s~^~#~' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/inittab if grep -q CONFIG_ASH=y /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/busybox-1.33.0/.config; then grep -qsE '^/bin/ash$' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shells || echo "/bin/ash" >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shells; fi if grep -q CONFIG_HUSH=y /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/busybox-1.33.0/.config; then grep -qsE '^/bin/hush$' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shells || echo "/bin/hush" >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shells; fi mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc echo "buildroot" > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/hostname /usr/bin/sed -i -e '$a \127.0.1.1\tbuildroot' -e '/^127.0.1.1/d' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/hosts mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc echo "Welcome to Buildroot" > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/issue /usr/bin/sed -i -e s,^root:[^:]*:,root:"*":, /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shadow grep -qsE '^/bin/sh$' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shells || echo "/bin/sh" >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/shells if [ -x /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/sbin/swapon -a -x /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/sbin/swapoff ]; then /usr/bin/sed -i -e '/^#.*\/sbin\/swap/s/^#\+[[:blank:]]*//' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/inittab; else /usr/bin/sed -i -e '/^[^#].*\/sbin\/swap/s/^/#/' /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/inittab; fi printf '%s\n' C en_US locale-archive > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/locales.nopurge for dir in /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/locale /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/X11/locale /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/lib/locale; do if [ ! -d $dir ]; then continue; fi; for langdir in $dir/*; do if [ -e "${langdir}" ]; then grep -qx "${langdir##*/}" /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/locales.nopurge || rm -rf $langdir; fi done; done if [ -d /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/X11/locale ]; then for lang in C en_US; do if [ -f /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/X11/locale/$lang/XLC_LOCALE ]; then echo "$lang/XLC_LOCALE: $lang"; fi done > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/X11/locale/locale.dir; fi rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/include /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/aclocal \ /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/lib/pkgconfig /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/pkgconfig \ /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/lib/cmake /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/cmake \ /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/doc find /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f find /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/lib/ /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/lib/ /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/libexec/ \ \( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/gdb rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/bash-completion rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/bash_completion.d rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/zsh rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/man /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/man rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/info /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/info rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/doc /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/doc rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share/gtk-doc rmdir /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/share 2>/dev/null || true rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/lib/debug /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/lib/debug find /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin/arm-linux-gnueabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true find /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target \( -name 'ld-*.so*' -o -name 'libpthread*.so*' \) -print0 | xargs -0 -r /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin/arm-linux-gnueabihf-strip --remove-section=.comment --remove-section=.note --strip-debug 2>/dev/null || true test -f /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/ld.so.conf && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true test -d /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc/ld.so.conf.d && \ { echo "ERROR: we shouldn't have a /etc/ld.so.conf.d directory"; exit 1; } || true mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc ( \ echo "NAME=Buildroot"; \ echo "VERSION=-g80b6bff04-dirty"; \ echo "ID=buildroot"; \ echo "VERSION_ID=2021.02.2"; \ echo "PRETTY_NAME=\"Buildroot 2021.02.2\"" \ ) > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr/lib/os-release ln -sf ../usr/lib/os-release /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/etc >>> Sanitizing RPATH in target tree PER_PACKAGE_DIR=/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/per-package /home/wdz/workspace/E230R/ark1668e_BSP/buildroot-2021.02.2/support/scripts/fix-rpath target >>> Copying overlay /home/wdz/workspace/E230R/ark1668e_BSP/buildroot-external/board/arkmicro/ark1668e_devb_emmc/rootfs_overlay >>> Executing post-build script /home/wdz/workspace/E230R/ark1668e_BSP/buildroot-external/board/arkmicro/ark1668e_devb_emmc/post_build.sh make[2]: 警告: jobserver 不可用: 正使用 -j1。添加 “+” 到父 make 的规则。 INSTALL drivers/net/wireless/realtek/rtl8821cs/rtl8821cs.ko INSTALL drivers/usb/musb/musb_ark.ko INSTALL drivers/usb/musb/musb_hdrc.ko DEPMOD 4.19.192 touch /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/usr >>> Generating root filesystems common tables rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs printf ' dbus -1 dbus -1 * /run/dbus - dbus DBus messagebus user\n\n' >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/full_users_table.txt printf ' /bin/busybox f 4755 0 0 - - - - -\n /usr/libexec/dbus-daemon-launch-helper f 4750 0 dbus - - - - -\n\n' > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/full_devices_table.txt cat system/device_table.txt >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/full_devices_table.txt >>> Generating filesystem image rootfs.ext2 mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/images rm -rf /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2 mkdir -p /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2 rsync -auH --exclude=/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/target/ /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/target echo '#!/bin/sh' > /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot echo "set -e" >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot echo "chown -h -R 0:0 /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/target" >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot PATH="/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin:/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/sbin:/home/wdz/workspace/E230R/ark1668e_BSP/buildroot-external/toolchain/gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabihf/bin:/home/wdz/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/wdz/armqtSDK/ark1668e/arm-buildroot-linux-gnueabihf_sdk-buildroot/bin" /home/wdz/workspace/E230R/ark1668e_BSP/buildroot-2021.02.2/support/scripts/mkusers /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/full_users_table.txt /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/target >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot echo "/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin/makedevs -d /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/full_devices_table.txt /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/target" >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot printf ' \n' >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot printf ' \n' >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot printf ' rm -f /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/images/rootfs.ext2\n /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/sbin/mkfs.ext4 -d /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/target -r 1 -N 0 -m 5 -L "rootfs" -O ^64bit /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/images/rootfs.ext2 "300M" || { ret=$?; echo "*** Maybe you need to increase the filesystem size (BR2_TARGET_ROOTFS_EXT2_SIZE)" 1>&2; exit $ret; }\n' >> /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot chmod a+x /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot PATH="/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin:/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/sbin:/home/wdz/workspace/E230R/ark1668e_BSP/buildroot-external/toolchain/gcc-linaro-7.3.1-2018.05-x86_64_arm-linux-gnueabihf/bin:/home/wdz/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin:/home/wdz/armqtSDK/ark1668e/arm-buildroot-linux-gnueabihf_sdk-buildroot/bin" FAKEROOTDONTTRYCHOWN=1 /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/host/bin/fakeroot -- /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/fakeroot rootdir=/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/ext2/target table='/home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/build/buildroot-fs/full_devices_table.txt' mke2fs 1.45.6 (20-Mar-2020) Creating regular file /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/images/rootfs.ext2 64-bit filesystem support is not enabled. The larger fields afforded by this feature enable full-strength checksumming. Pass -O 64bit to rectify. Creating filesystem with 307200 1k blocks and 76912 inodes Filesystem UUID: 98dbdbdc-4a6b-42a8-ac41-8c702e36b34b Superblock backups stored on blocks: 8193, 24577, 40961, 57345, 73729, 204801, 221185 Allocating group tables: 0/38 done Writing inode tables: 0/38 done Creating journal (8192 blocks): done Copying files into the device: done Writing superblocks and filesystem accounting information: 0/38 done ln -sf rootfs.ext2 /home/wdz/workspace/E230R/ark1668e_BSP/output/board/ark1668e_devb_emmc/buildroot/images/rootfs.ext4