12345678910111213141516171819202122232425262728 |
- Broadcom V3D GPU
- Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
- For V3D 2.x, see brcm,bcm-vc4.txt.
- Required properties:
- - compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
- - reg: Physical base addresses and lengths of the register areas
- - reg-names: Names for the register areas. The "hub", "bridge", and "core0"
- register areas are always required. The "gca" register area
- is required if the GCA cache controller is present.
- - interrupts: The interrupt numbers. The first interrupt is for the hub,
- while the following interrupts are for the cores.
- See bindings/interrupt-controller/interrupts.txt
- Optional properties:
- - clocks: The core clock the unit runs on
- v3d {
- compatible = "brcm,7268-v3d";
- reg = <0xf1204000 0x100>,
- <0xf1200000 0x4000>,
- <0xf1208000 0x4000>,
- <0xf1204100 0x100>;
- reg-names = "bridge", "hub", "core0", "gca";
- interrupts = <0 78 4>,
- <0 77 4>;
- };
|