| 12345678910111213141516171819202122232425262728293031323334353637 |
- Motorola CPCAP PMIC battery charger binding
- Required properties:
- - compatible: Shall be "motorola,mapphone-cpcap-charger"
- - interrupts: Interrupt specifier for each name in interrupt-names
- - interrupt-names: Should contain the following entries:
- "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
- "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb"
- - io-channels: IIO ADC channel specifier for each name in io-channel-names
- - io-channel-names: Should contain the following entries:
- "battdetb", "battp", "vbus", "chg_isense", "batti"
- Optional properties:
- - mode-gpios: Optionally CPCAP charger can have a companion wireless
- charge controller that is controlled with two GPIOs
- that are active low.
- Example:
- cpcap_charger: charger {
- compatible = "motorola,mapphone-cpcap-charger";
- interrupts-extended = <
- &cpcap 13 0 &cpcap 12 0 &cpcap 29 0 &cpcap 28 0
- &cpcap 22 0 &cpcap 20 0 &cpcap 19 0 &cpcap 54 0
- >;
- interrupt-names =
- "chrg_det", "rvrs_chrg", "chrg_se1b", "se0conn",
- "rvrs_mode", "chrgcurr1", "vbusvld", "battdetb";
- mode-gpios = <&gpio3 29 GPIO_ACTIVE_LOW
- &gpio3 23 GPIO_ACTIVE_LOW>;
- io-channels = <&cpcap_adc 0 &cpcap_adc 1
- &cpcap_adc 2 &cpcap_adc 5
- &cpcap_adc 6>;
- io-channel-names = "battdetb", "battp",
- "vbus", "chg_isense",
- "batti";
- };
|
