| 12345678910111213141516171819202122232425262728293031323334353637 |
- U-Boot for LogicPD i.MX6 Development Kit
- ----------------------------------------
- This file contains information for the port of U-Boot to the Logic PD Development kit.
- Logic PD has an i.MX6 System On Module (SOM) and a correspondong development
- board. SOM has a built-in microSD socket, DDR and NAND flash. The development kit has
- an SMSC Ethernet PHY, serial debug port and a variety of peripherals.
- On the intial release, the SOM came with either an i.MX6D or i.MX6Q.
- For more details about Logic PD i.MX6 Development kit, visit:
- https://www.logicpd.com/
- Building U-Boot for Logic PD Development Kit
- --------------------------------------------
- To build U-Boot for the Dual and Quad variants:
- make imx6q_logic_defconfig
- make u-boot.imx ARCH=arm CROSS_COMPILE=arm-linux-
- Flashing U-Boot into the SD card
- --------------------------------
- See README.imximage for details on booting from SD
- Flashing U-Boot into NAND
- -------------------------
- Once in Linux with MTD support for the NAND on /dev/mtd0, program U-Boot with the following:
- with:
- kobs-ng init -v -x u-boot-dtb.imx
- Additional Support Documentation can be found at:
- https://support.logicpd.com/
|
