Inicio Explorar Axuda
Rexistro Iniciar sesión
RD_Software
/
linux-arkmicro
2
0
Fork 1
Ficheiros Incidencias 0 Pull Requests 0 Wiki
Árbore: 31daef21e5
Ramas Etiquetas
linux-arkmicro
/
u-boot
/
board
/
udoo
huangliang 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
..
neo 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
Kconfig 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
MAINTAINERS 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
Makefile 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
README 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
udoo.c 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos
udoo_spl.c 87498f5edd first commit(v1.0) %!s(int64=3) %!d(string=hai) anos

README

How to use U-Boot on MX6Q/DL Udoo boards
----------------------------------------

- Build U-Boot for MX6Q/DL Udoo boards:

$ make mrproper
$ make udoo_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.