linux-arkmicro/buildroot/board/stmicroelectronics/stm32f429-disco

STM32F429 Discovery
===================

This tutorial describes how to use the predefined Buildroot
configuration for the STM32F429 Discovery evaluation platform.

Supported HW
------------

- STM32F429I-DISCO evaluation board
- STM32F429I-DISC1 evaluation board

Building
--------

make stm32f429_disco_defconfig
make

Wire the UART
-------------

Use a USB to TTL adapter, and connect:

- RX to PA9
- TX to PA10
- GND to one of the GND available on the board

The UART is configured at 115200.

Flashing
--------

./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \
{stm32f429discovery|stm32f429disc1}

It will flash the minimal bootloader, the Device Tree Blob, and the
kernel image which includes the root filesystem as initramfs.