| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115 |
- menuconfig PCI
- bool "PCI support"
- default y if PPC
- help
- Enable support for PCI (Peripheral Interconnect Bus), a type of bus
- used on some devices to allow the CPU to communicate with its
- peripherals.
- if PCI
- config DM_PCI
- bool "Enable driver model for PCI"
- depends on DM
- help
- Use driver model for PCI. Driver model is the new method for
- orgnising devices in U-Boot. For PCI, driver model keeps track of
- available PCI devices, allows scanning of PCI buses and provides
- device configuration support.
- config DM_PCI_COMPAT
- bool "Enable compatible functions for PCI"
- depends on DM_PCI
- help
- Enable compatibility functions for PCI so that old code can be used
- with CONFIG_DM_PCI enabled. This should be used as an interim
- measure when porting a board to use driver model for PCI. Once the
- board is fully supported, this option should be disabled.
- config PCI_AARDVARK
- bool "Enable Aardvark PCIe driver"
- default n
- depends on DM_PCI
- depends on ARMADA_3700
- help
- Say Y here if you want to enable PCIe controller support on
- Armada37x0 SoCs. The PCIe controller on Armada37x0 is based on
- Aardvark hardware.
- config PCI_PNP
- bool "Enable Plug & Play support for PCI"
- depends on PCI || DM_PCI
- default y
- help
- Enable PCI memory and I/O space resource allocation and assignment.
- config PCIE_ECAM_GENERIC
- bool "Generic ECAM-based PCI host controller support"
- default n
- depends on DM_PCI
- help
- Say Y here if you want to enable support for generic ECAM-based
- PCIe host controllers, such as the one emulated by QEMU.
- config PCIE_DW_MVEBU
- bool "Enable Armada-8K PCIe driver (DesignWare core)"
- depends on DM_PCI
- depends on ARMADA_8K
- help
- Say Y here if you want to enable PCIe controller support on
- Armada-8K SoCs. The PCIe controller on Armada-8K is based on
- DesignWare hardware.
- config PCI_RCAR_GEN2
- bool "Renesas RCar Gen2 PCIe driver"
- depends on DM_PCI
- depends on RCAR_32
- help
- Say Y here if you want to enable PCIe controller support on
- Renesas RCar Gen2 SoCs. The PCIe controller on RCar Gen2 is
- also used to access EHCI USB controller on the SoC.
- config PCI_SANDBOX
- bool "Sandbox PCI support"
- depends on SANDBOX && DM_PCI
- help
- Support PCI on sandbox, as an emulated bus. This permits testing of
- PCI feature such as bus scanning, device configuration and device
- access. The available (emulated) devices are defined statically in
- the device tree but the normal PCI scan technique is used to find
- then.
- config PCI_TEGRA
- bool "Tegra PCI support"
- depends on TEGRA
- depends on (TEGRA186 && POWER_DOMAIN) || (!TEGRA186)
- help
- Enable support for the PCIe controller found on some generations of
- Tegra. Tegra20 has 2 root ports with a total of 4 lanes, Tegra30 has
- 3 root ports with a total of 6 lanes and Tegra124 has 2 root ports
- with a total of 5 lanes. Some boards require this for Ethernet
- support to work (e.g. beaver, jetson-tk1).
- config PCI_XILINX
- bool "Xilinx AXI Bridge for PCI Express"
- depends on DM_PCI
- help
- Enable support for the Xilinx AXI bridge for PCI express, an IP block
- which can be used on some generations of Xilinx FPGAs.
- config PCIE_LAYERSCAPE
- bool "Layerscape PCIe support"
- depends on DM_PCI
- help
- Support Layerscape PCIe. The Layerscape SoC may have one or several
- PCIe controllers. The PCIe may works in RC or EP mode according to
- RCW[HOST_AGT_PEX] setting.
- config PCIE_INTEL_FPGA
- bool "Intel FPGA PCIe support"
- depends on DM_PCI
- help
- Say Y here if you want to enable PCIe controller support on Intel
- FPGA, example Stratix 10.
- endif
|
