| 12345678910111213141516171819202122232425262728293031323334353637 |
- Intro
- =====
- This default configuration will allow you to start experimenting with the
- buildroot environment for the Bananapi M1. With the current configuration
- it will bring-up the board, and allow access through the serial console.
- Bananapi M1 link:
- http://www.banana-pi.org/m1.html
- Wiki link:
- https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M1
- This configuration uses U-Boot mainline and kernel mainline.
- How to build
- ============
- $ make bananapi_m1_defconfig
- $ make
- Note: you will need access to the internet to download the required
- sources.
- How to write the SD card
- ========================
- Once the build process is finished you will have an image called "sdcard.img"
- in the output/images/ directory.
- Copy the bootable "sdcard.img" onto an SD card with "dd":
- $ sudo dd if=output/images/sdcard.img of=/dev/sdX
- $ sudo sync
- Insert the micro SDcard in your Bananapi M1 and power it up. The console
- is on the serial line, 115200 8N1.
|
