| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138 |
- Broadcom Kona Family Clocks
- This binding is associated with Broadcom SoCs having "Kona" style
- clock control units (CCUs). A CCU is a clock provider that manages
- a set of clock signals. Each CCU is represented by a node in the
- device tree.
- This binding uses the common clock binding:
- Documentation/devicetree/bindings/clock/clock-bindings.txt
- Required properties:
- - compatible
- Shall have a value of the form "brcm,<model>-<which>-ccu",
- where <model> is a Broadcom SoC model number and <which> is
- the name of a defined CCU. For example:
- "brcm,bcm11351-root-ccu"
- The compatible strings used for each supported SoC family
- are defined below.
- - reg
- Shall define the base and range of the address space
- containing clock control registers
- - #clock-cells
- Shall have value <1>. The permitted clock-specifier values
- are defined below.
- - clock-output-names
- Shall be an ordered list of strings defining the names of
- the clocks provided by the CCU.
- Device tree example:
- slave_ccu: slave_ccu {
- compatible = "brcm,bcm11351-slave-ccu";
- reg = <0x3e011000 0x0f00>;
- #clock-cells = <1>;
- clock-output-names = "uartb",
- "uartb2",
- "uartb3",
- "uartb4";
- };
- ref_crystal_clk: ref_crystal {
- #clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <26000000>;
- };
- uart@3e002000 {
- compatible = "brcm,bcm11351-dw-apb-uart", "snps,dw-apb-uart";
- reg = <0x3e002000 0x1000>;
- clocks = <&slave_ccu BCM281XX_SLAVE_CCU_UARTB3>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
- reg-shift = <2>;
- reg-io-width = <4>;
- };
- BCM281XX family
- ---------------
- CCU compatible string values for SoCs in the BCM281XX family are:
- "brcm,bcm11351-root-ccu"
- "brcm,bcm11351-aon-ccu"
- "brcm,bcm11351-hub-ccu"
- "brcm,bcm11351-master-ccu"
- "brcm,bcm11351-slave-ccu"
- The following table defines the set of CCUs and clock specifiers for
- BCM281XX family clocks. When a clock consumer references a clocks,
- its symbolic specifier (rather than its numeric index value) should
- be used. These specifiers are defined in:
- "include/dt-bindings/clock/bcm281xx.h"
- CCU Clock Type Index Specifier
- --- ----- ---- ----- ---------
- root frac_1m peri 0 BCM281XX_ROOT_CCU_FRAC_1M
- aon hub_timer peri 0 BCM281XX_AON_CCU_HUB_TIMER
- aon pmu_bsc peri 1 BCM281XX_AON_CCU_PMU_BSC
- aon pmu_bsc_var peri 2 BCM281XX_AON_CCU_PMU_BSC_VAR
- hub tmon_1m peri 0 BCM281XX_HUB_CCU_TMON_1M
- master sdio1 peri 0 BCM281XX_MASTER_CCU_SDIO1
- master sdio2 peri 1 BCM281XX_MASTER_CCU_SDIO2
- master sdio3 peri 2 BCM281XX_MASTER_CCU_SDIO3
- master sdio4 peri 3 BCM281XX_MASTER_CCU_SDIO4
- master dmac peri 4 BCM281XX_MASTER_CCU_DMAC
- master usb_ic peri 5 BCM281XX_MASTER_CCU_USB_IC
- master hsic2_48m peri 6 BCM281XX_MASTER_CCU_HSIC_48M
- master hsic2_12m peri 7 BCM281XX_MASTER_CCU_HSIC_12M
- slave uartb peri 0 BCM281XX_SLAVE_CCU_UARTB
- slave uartb2 peri 1 BCM281XX_SLAVE_CCU_UARTB2
- slave uartb3 peri 2 BCM281XX_SLAVE_CCU_UARTB3
- slave uartb4 peri 3 BCM281XX_SLAVE_CCU_UARTB4
- slave ssp0 peri 4 BCM281XX_SLAVE_CCU_SSP0
- slave ssp2 peri 5 BCM281XX_SLAVE_CCU_SSP2
- slave bsc1 peri 6 BCM281XX_SLAVE_CCU_BSC1
- slave bsc2 peri 7 BCM281XX_SLAVE_CCU_BSC2
- slave bsc3 peri 8 BCM281XX_SLAVE_CCU_BSC3
- slave pwm peri 9 BCM281XX_SLAVE_CCU_PWM
- BCM21664 family
- ---------------
- CCU compatible string values for SoCs in the BCM21664 family are:
- "brcm,bcm21664-root-ccu"
- "brcm,bcm21664-aon-ccu"
- "brcm,bcm21664-master-ccu"
- "brcm,bcm21664-slave-ccu"
- The following table defines the set of CCUs and clock specifiers for
- BCM21664 family clocks. When a clock consumer references a clocks,
- its symbolic specifier (rather than its numeric index value) should
- be used. These specifiers are defined in:
- "include/dt-bindings/clock/bcm21664.h"
- CCU Clock Type Index Specifier
- --- ----- ---- ----- ---------
- root frac_1m peri 0 BCM21664_ROOT_CCU_FRAC_1M
- aon hub_timer peri 0 BCM21664_AON_CCU_HUB_TIMER
- master sdio1 peri 0 BCM21664_MASTER_CCU_SDIO1
- master sdio2 peri 1 BCM21664_MASTER_CCU_SDIO2
- master sdio3 peri 2 BCM21664_MASTER_CCU_SDIO3
- master sdio4 peri 3 BCM21664_MASTER_CCU_SDIO4
- master sdio1_sleep peri 4 BCM21664_MASTER_CCU_SDIO1_SLEEP
- master sdio2_sleep peri 5 BCM21664_MASTER_CCU_SDIO2_SLEEP
- master sdio3_sleep peri 6 BCM21664_MASTER_CCU_SDIO3_SLEEP
- master sdio4_sleep peri 7 BCM21664_MASTER_CCU_SDIO4_SLEEP
- slave uartb peri 0 BCM21664_SLAVE_CCU_UARTB
- slave uartb2 peri 1 BCM21664_SLAVE_CCU_UARTB2
- slave uartb3 peri 2 BCM21664_SLAVE_CCU_UARTB3
- slave uartb4 peri 3 BCM21664_SLAVE_CCU_UARTB4
- slave bsc1 peri 4 BCM21664_SLAVE_CCU_BSC1
- slave bsc2 peri 5 BCM21664_SLAVE_CCU_BSC2
- slave bsc3 peri 6 BCM21664_SLAVE_CCU_BSC3
- slave bsc4 peri 7 BCM21664_SLAVE_CCU_BSC4
|
