| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171 |
- #
- # USB Dual Role (OTG-ready) Controller Drivers
- # for silicon based on Mentor Graphics INVENTRA designs
- #
- # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
- config USB_MUSB_HDRC
- tristate 'Inventra Highspeed Dual Role Controller'
- depends on (USB || USB_GADGET)
- depends on HAS_IOMEM
- help
- Say Y here if your system has a dual role high speed USB
- controller based on the Mentor Graphics silicon IP. Then
- configure options to match your silicon and the board
- it's being used with, including the USB peripheral role,
- or the USB host role, or both.
- Texas Instruments families using this IP include DaVinci
- (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
- Allwinner SoCs using this IP include A10, A13, A20, ...
- If you do not know what this is, please say N.
- To compile this driver as a module, choose M here; the
- module will be called "musb-hdrc".
- if USB_MUSB_HDRC
- choice
- bool "MUSB Mode Selection"
- default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
- default USB_MUSB_HOST if (USB && !USB_GADGET)
- default USB_MUSB_GADGET if (!USB && USB_GADGET)
- config USB_MUSB_HOST
- bool "Host only mode"
- depends on USB=y || USB=USB_MUSB_HDRC
- help
- Select this when you want to use MUSB in host mode only,
- thereby the gadget feature will be regressed.
- config USB_MUSB_GADGET
- bool "Gadget only mode"
- depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
- depends on HAS_DMA
- help
- Select this when you want to use MUSB in gadget mode only,
- thereby the host feature will be regressed.
- config USB_MUSB_DUAL_ROLE
- bool "Dual Role mode"
- depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
- depends on HAS_DMA
- help
- This is the default mode of working of MUSB controller where
- both host and gadget features are enabled.
- endchoice
- comment "Platform Glue Layer"
- config USB_MUSB_ARKMICRO
- tristate "ArkMicro musb"
- config USB_MUSB_SUNXI
- tristate "Allwinner (sunxi)"
- depends on ARCH_SUNXI
- depends on NOP_USB_XCEIV
- depends on PHY_SUN4I_USB
- depends on EXTCON
- select GENERIC_PHY
- select SUNXI_SRAM
- config USB_MUSB_DAVINCI
- tristate "DaVinci"
- depends on ARCH_DAVINCI_DMx
- depends on NOP_USB_XCEIV
- depends on BROKEN
- config USB_MUSB_DA8XX
- tristate "DA8xx/OMAP-L1x"
- depends on ARCH_DAVINCI_DA8XX
- depends on NOP_USB_XCEIV
- select PHY_DA8XX_USB
- config USB_MUSB_TUSB6010
- tristate "TUSB6010"
- depends on HAS_IOMEM
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
- config USB_MUSB_OMAP2PLUS
- tristate "OMAP2430 and onwards"
- depends on ARCH_OMAP2PLUS && USB
- depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
- select GENERIC_PHY
- config USB_MUSB_AM35X
- tristate "AM35x"
- depends on ARCH_OMAP
- depends on NOP_USB_XCEIV
- config USB_MUSB_DSPS
- tristate "TI DSPS platforms"
- select USB_MUSB_AM335X_CHILD
- depends on ARCH_OMAP2PLUS || COMPILE_TEST
- depends on OF_IRQ
- config USB_MUSB_UX500
- tristate "Ux500 platforms"
- depends on ARCH_U8500 || COMPILE_TEST
- config USB_MUSB_JZ4740
- tristate "JZ4740"
- depends on NOP_USB_XCEIV
- depends on MACH_JZ4740 || COMPILE_TEST
- depends on USB_MUSB_GADGET
- depends on USB_OTG_BLACKLIST_HUB
- config USB_MUSB_AM335X_CHILD
- tristate
- comment "MUSB DMA mode"
- config MUSB_PIO_ONLY
- bool 'Disable DMA (always use PIO)'
- help
- All data is copied between memory and FIFO by the CPU.
- DMA controllers are ignored.
- Do not choose this unless DMA support for your SOC or board
- is unavailable (or unstable). When DMA is enabled at compile time,
- you can still disable it at run time using the "use_dma=n" module
- parameter.
- if !MUSB_PIO_ONLY
- config USB_UX500_DMA
- bool 'ST Ericsson Ux500'
- depends on USB_MUSB_UX500
- help
- Enable DMA transfers on UX500 platforms.
- config USB_INVENTRA_DMA
- bool 'Inventra'
- depends on USB_MUSB_OMAP2PLUS || USB_MUSB_ARKMICRO
- help
- Enable DMA transfers using Mentor's engine.
- config USB_TI_CPPI_DMA
- bool 'TI CPPI (Davinci)'
- depends on USB_MUSB_DAVINCI
- help
- Enable DMA transfers when TI CPPI DMA is available.
- config USB_TI_CPPI41_DMA
- bool 'TI CPPI 4.1'
- depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
- select TI_CPPI41
- config USB_TUSB_OMAP_DMA
- bool 'TUSB 6010'
- depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
- depends on ARCH_OMAP
- help
- Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
- endif # !MUSB_PIO_ONLY
- endif # USB_MUSB_HDRC
|
