| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748 |
- **************************
- Freescale i.MX23 EVK board
- **************************
- This file documents the Buildroot support for the Freescale i.MX23 EVK board.
- Build
- =====
- First, configure Buildroot for your i.MX23 EVK board:
- make imx23evk_defconfig
- Build all components:
- make
- You will find in output/images/ directory the following files:
- - imx23-evk.dtb
- - rootfs.tar
- - u-boot.sd
- - zImage
- Create a bootable SD card
- =========================
- To determine the device associated to the SD card have a look in the
- /proc/partitions file:
- cat /proc/partitions
- Then, run the following command:
- *** WARNING! The command will destroy all the card content. Use with care! ***
- sudo dd if=output/images/sdcard.img of=/dev/<your-microsd-device>
- Boot the i.MX23 EVK board
- =========================
- - Put the Boot Mode Select jumper as 1 0 0 1 so that it can boot
- from the SD card
- - Insert the SD card in the SD Card slot of the board;
- - Connect an RS232 UART cable to the Debug UART Port and connect using a
- terminal emulator at 115200 bps, 8n1;
- - power on the board.
- Enjoy!
|
