| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687 |
- Kernel driver ir35221
- =====================
- Supported chips:
- * Infinion IR35221
- Prefix: 'ir35221'
- Addresses scanned: -
- Datasheet: Datasheet is not publicly available.
- Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
- Description
- -----------
- IR35221 is a Digital DC-DC Multiphase Converter
- Usage Notes
- -----------
- This driver does not probe for PMBus devices. You will have to instantiate
- devices explicitly.
- Example: the following commands will load the driver for an IR35221
- at address 0x70 on I2C bus #4:
- # modprobe ir35221
- # echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
- Sysfs attributes
- ----------------
- curr1_label "iin"
- curr1_input Measured input current
- curr1_max Maximum current
- curr1_max_alarm Current high alarm
- curr[2-3]_label "iout[1-2]"
- curr[2-3]_input Measured output current
- curr[2-3]_crit Critical maximum current
- curr[2-3]_crit_alarm Current critical high alarm
- curr[2-3]_highest Highest output current
- curr[2-3]_lowest Lowest output current
- curr[2-3]_max Maximum current
- curr[2-3]_max_alarm Current high alarm
- in1_label "vin"
- in1_input Measured input voltage
- in1_crit Critical maximum input voltage
- in1_crit_alarm Input voltage critical high alarm
- in1_highest Highest input voltage
- in1_lowest Lowest input voltage
- in1_min Minimum input voltage
- in1_min_alarm Input voltage low alarm
- in[2-3]_label "vout[1-2]"
- in[2-3]_input Measured output voltage
- in[2-3]_lcrit Critical minimum output voltage
- in[2-3]_lcrit_alarm Output voltage critical low alarm
- in[2-3]_crit Critical maximum output voltage
- in[2-3]_crit_alarm Output voltage critical high alarm
- in[2-3]_highest Highest output voltage
- in[2-3]_lowest Lowest output voltage
- in[2-3]_max Maximum output voltage
- in[2-3]_max_alarm Output voltage high alarm
- in[2-3]_min Minimum output voltage
- in[2-3]_min_alarm Output voltage low alarm
- power1_label "pin"
- power1_input Measured input power
- power1_alarm Input power high alarm
- power1_max Input power limit
- power[2-3]_label "pout[1-2]"
- power[2-3]_input Measured output power
- power[2-3]_max Output power limit
- power[2-3]_max_alarm Output power high alarm
- temp[1-2]_input Measured temperature
- temp[1-2]_crit Critical high temperature
- temp[1-2]_crit_alarm Chip temperature critical high alarm
- temp[1-2]_highest Highest temperature
- temp[1-2]_lowest Lowest temperature
- temp[1-2]_max Maximum temperature
- temp[1-2]_max_alarm Chip temperature high alarm
|
