t4240emu.c 1.6 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081
  1. // SPDX-License-Identifier: GPL-2.0+
  2. /*
  3. * Copyright 2013 Freescale Semiconductor, Inc.
  4. */
  5. #include <common.h>
  6. #include <command.h>
  7. #include <i2c.h>
  8. #include <netdev.h>
  9. #include <linux/compiler.h>
  10. #include <asm/mmu.h>
  11. #include <asm/processor.h>
  12. #include <asm/cache.h>
  13. #include <asm/immap_85xx.h>
  14. #include <asm/fsl_law.h>
  15. #include <asm/fsl_serdes.h>
  16. #include <asm/fsl_liodn.h>
  17. DECLARE_GLOBAL_DATA_PTR;
  18. int checkboard(void)
  19. {
  20. struct cpu_type *cpu = gd->arch.cpu;
  21. printf("Board: %sEMU\n", cpu->name);
  22. return 0;
  23. }
  24. int board_early_init_r(void)
  25. {
  26. const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
  27. int flash_esel = find_tlb_idx((void *)flashbase, 1);
  28. /*
  29. * Remap Boot flash + PROMJET region to caching-inhibited
  30. * so that flash can be erased properly.
  31. */
  32. /* Flush d-cache and invalidate i-cache of any FLASH data */
  33. flush_dcache();
  34. invalidate_icache();
  35. if (flash_esel == -1) {
  36. /* very unlikely unless something is messed up */
  37. puts("Error: Could not find TLB for FLASH BASE\n");
  38. flash_esel = 2; /* give our best effort to continue */
  39. } else {
  40. /* invalidate existing TLB entry for flash */
  41. disable_tlb(flash_esel);
  42. }
  43. set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
  44. MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
  45. 0, flash_esel, BOOKE_PAGESZ_256M, 1);
  46. return 0;
  47. }
  48. int misc_init_r(void)
  49. {
  50. return 0;
  51. }
  52. int ft_board_setup(void *blob, bd_t *bd)
  53. {
  54. phys_addr_t base;
  55. phys_size_t size;
  56. ft_cpu_setup(blob, bd);
  57. base = env_get_bootm_low();
  58. size = env_get_bootm_size();
  59. fdt_fixup_memory(blob, (u64)base, (u64)size);
  60. fdt_fixup_liodn(blob);
  61. fsl_fdt_fixup_dr_usb(blob, bd);
  62. return 0;
  63. }