1
0

memory.h 9.4 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317
  1. /*
  2. * Based on arch/arm/include/asm/memory.h
  3. *
  4. * Copyright (C) 2000-2002 Russell King
  5. * Copyright (C) 2012 ARM Ltd.
  6. *
  7. * This program is free software; you can redistribute it and/or modify
  8. * it under the terms of the GNU General Public License version 2 as
  9. * published by the Free Software Foundation.
  10. *
  11. * This program is distributed in the hope that it will be useful,
  12. * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13. * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  14. * GNU General Public License for more details.
  15. *
  16. * You should have received a copy of the GNU General Public License
  17. * along with this program. If not, see <http://www.gnu.org/licenses/>.
  18. *
  19. * Note: this file should not be included by non-asm/.h files
  20. */
  21. #ifndef __ASM_MEMORY_H
  22. #define __ASM_MEMORY_H
  23. #include <linux/compiler.h>
  24. #include <linux/const.h>
  25. #include <linux/types.h>
  26. #include <asm/bug.h>
  27. #include <asm/page-def.h>
  28. #include <asm/sizes.h>
  29. /*
  30. * Size of the PCI I/O space. This must remain a power of two so that
  31. * IO_SPACE_LIMIT acts as a mask for the low bits of I/O addresses.
  32. */
  33. #define PCI_IO_SIZE SZ_16M
  34. /*
  35. * Log2 of the upper bound of the size of a struct page. Used for sizing
  36. * the vmemmap region only, does not affect actual memory footprint.
  37. * We don't use sizeof(struct page) directly since taking its size here
  38. * requires its definition to be available at this point in the inclusion
  39. * chain, and it may not be a power of 2 in the first place.
  40. */
  41. #define STRUCT_PAGE_MAX_SHIFT 6
  42. /*
  43. * VMEMMAP_SIZE - allows the whole linear region to be covered by
  44. * a struct page array
  45. */
  46. #define VMEMMAP_SIZE (UL(1) << (VA_BITS - PAGE_SHIFT - 1 + STRUCT_PAGE_MAX_SHIFT))
  47. /*
  48. * PAGE_OFFSET - the virtual address of the start of the linear map (top
  49. * (VA_BITS - 1))
  50. * KIMAGE_VADDR - the virtual address of the start of the kernel image
  51. * VA_BITS - the maximum number of bits for virtual addresses.
  52. * VA_START - the first kernel virtual address.
  53. */
  54. #define VA_BITS (CONFIG_ARM64_VA_BITS)
  55. #define VA_START (UL(0xffffffffffffffff) - \
  56. (UL(1) << VA_BITS) + 1)
  57. #define PAGE_OFFSET (UL(0xffffffffffffffff) - \
  58. (UL(1) << (VA_BITS - 1)) + 1)
  59. #define KIMAGE_VADDR (MODULES_END)
  60. #define MODULES_END (MODULES_VADDR + MODULES_VSIZE)
  61. #define MODULES_VADDR (VA_START + KASAN_SHADOW_SIZE)
  62. #define MODULES_VSIZE (SZ_128M)
  63. #define VMEMMAP_START (PAGE_OFFSET - VMEMMAP_SIZE)
  64. #define PCI_IO_END (VMEMMAP_START - SZ_2M)
  65. #define PCI_IO_START (PCI_IO_END - PCI_IO_SIZE)
  66. #define FIXADDR_TOP (PCI_IO_START - SZ_2M)
  67. #define KERNEL_START _text
  68. #define KERNEL_END _end
  69. /*
  70. * KASAN requires 1/8th of the kernel virtual address space for the shadow
  71. * region. KASAN can bloat the stack significantly, so double the (minimum)
  72. * stack size when KASAN is in use, and then double it again if KASAN_EXTRA is
  73. * on.
  74. */
  75. #ifdef CONFIG_KASAN
  76. #define KASAN_SHADOW_SCALE_SHIFT 3
  77. #define KASAN_SHADOW_SIZE (UL(1) << (VA_BITS - KASAN_SHADOW_SCALE_SHIFT))
  78. #ifdef CONFIG_KASAN_EXTRA
  79. #define KASAN_THREAD_SHIFT 2
  80. #else
  81. #define KASAN_THREAD_SHIFT 1
  82. #endif /* CONFIG_KASAN_EXTRA */
  83. #else
  84. #define KASAN_SHADOW_SIZE (0)
  85. #define KASAN_THREAD_SHIFT 0
  86. #endif
  87. #define MIN_THREAD_SHIFT (14 + KASAN_THREAD_SHIFT)
  88. /*
  89. * VMAP'd stacks are allocated at page granularity, so we must ensure that such
  90. * stacks are a multiple of page size.
  91. */
  92. #if defined(CONFIG_VMAP_STACK) && (MIN_THREAD_SHIFT < PAGE_SHIFT)
  93. #define THREAD_SHIFT PAGE_SHIFT
  94. #else
  95. #define THREAD_SHIFT MIN_THREAD_SHIFT
  96. #endif
  97. #if THREAD_SHIFT >= PAGE_SHIFT
  98. #define THREAD_SIZE_ORDER (THREAD_SHIFT - PAGE_SHIFT)
  99. #endif
  100. #define THREAD_SIZE (UL(1) << THREAD_SHIFT)
  101. /*
  102. * By aligning VMAP'd stacks to 2 * THREAD_SIZE, we can detect overflow by
  103. * checking sp & (1 << THREAD_SHIFT), which we can do cheaply in the entry
  104. * assembly.
  105. */
  106. #ifdef CONFIG_VMAP_STACK
  107. #define THREAD_ALIGN (2 * THREAD_SIZE)
  108. #else
  109. #define THREAD_ALIGN THREAD_SIZE
  110. #endif
  111. #define IRQ_STACK_SIZE THREAD_SIZE
  112. #define OVERFLOW_STACK_SIZE SZ_4K
  113. /*
  114. * Alignment of kernel segments (e.g. .text, .data).
  115. */
  116. #if defined(CONFIG_DEBUG_ALIGN_RODATA)
  117. /*
  118. * 4 KB granule: 1 level 2 entry
  119. * 16 KB granule: 128 level 3 entries, with contiguous bit
  120. * 64 KB granule: 32 level 3 entries, with contiguous bit
  121. */
  122. #define SEGMENT_ALIGN SZ_2M
  123. #else
  124. /*
  125. * 4 KB granule: 16 level 3 entries, with contiguous bit
  126. * 16 KB granule: 4 level 3 entries, without contiguous bit
  127. * 64 KB granule: 1 level 3 entry
  128. */
  129. #define SEGMENT_ALIGN SZ_64K
  130. #endif
  131. /*
  132. * Memory types available.
  133. */
  134. #define MT_DEVICE_nGnRnE 0
  135. #define MT_DEVICE_nGnRE 1
  136. #define MT_DEVICE_GRE 2
  137. #define MT_NORMAL_NC 3
  138. #define MT_NORMAL 4
  139. #define MT_NORMAL_WT 5
  140. /*
  141. * Memory types for Stage-2 translation
  142. */
  143. #define MT_S2_NORMAL 0xf
  144. #define MT_S2_DEVICE_nGnRE 0x1
  145. /*
  146. * Memory types for Stage-2 translation when ID_AA64MMFR2_EL1.FWB is 0001
  147. * Stage-2 enforces Normal-WB and Device-nGnRE
  148. */
  149. #define MT_S2_FWB_NORMAL 6
  150. #define MT_S2_FWB_DEVICE_nGnRE 1
  151. #ifdef CONFIG_ARM64_4K_PAGES
  152. #define IOREMAP_MAX_ORDER (PUD_SHIFT)
  153. #else
  154. #define IOREMAP_MAX_ORDER (PMD_SHIFT)
  155. #endif
  156. #ifdef CONFIG_BLK_DEV_INITRD
  157. #define __early_init_dt_declare_initrd(__start, __end) \
  158. do { \
  159. initrd_start = (__start); \
  160. initrd_end = (__end); \
  161. } while (0)
  162. #endif
  163. #ifndef __ASSEMBLY__
  164. #include <linux/bitops.h>
  165. #include <linux/mmdebug.h>
  166. extern s64 memstart_addr;
  167. /* PHYS_OFFSET - the physical address of the start of memory. */
  168. #define PHYS_OFFSET ({ VM_BUG_ON(memstart_addr & 1); memstart_addr; })
  169. /* the virtual base of the kernel image (minus TEXT_OFFSET) */
  170. extern u64 kimage_vaddr;
  171. /* the offset between the kernel virtual and physical mappings */
  172. extern u64 kimage_voffset;
  173. static inline unsigned long kaslr_offset(void)
  174. {
  175. return kimage_vaddr - KIMAGE_VADDR;
  176. }
  177. /*
  178. * Allow all memory at the discovery stage. We will clip it later.
  179. */
  180. #define MIN_MEMBLOCK_ADDR 0
  181. #define MAX_MEMBLOCK_ADDR U64_MAX
  182. /*
  183. * PFNs are used to describe any physical page; this means
  184. * PFN 0 == physical address 0.
  185. *
  186. * This is the PFN of the first RAM page in the kernel
  187. * direct-mapped view. We assume this is the first page
  188. * of RAM in the mem_map as well.
  189. */
  190. #define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT)
  191. /*
  192. * Physical vs virtual RAM address space conversion. These are
  193. * private definitions which should NOT be used outside memory.h
  194. * files. Use virt_to_phys/phys_to_virt/__pa/__va instead.
  195. */
  196. /*
  197. * The linear kernel range starts in the middle of the virtual adddress
  198. * space. Testing the top bit for the start of the region is a
  199. * sufficient check.
  200. */
  201. #define __is_lm_address(addr) (!!((addr) & BIT(VA_BITS - 1)))
  202. #define __lm_to_phys(addr) (((addr) & ~PAGE_OFFSET) + PHYS_OFFSET)
  203. #define __kimg_to_phys(addr) ((addr) - kimage_voffset)
  204. #define __virt_to_phys_nodebug(x) ({ \
  205. phys_addr_t __x = (phys_addr_t)(x); \
  206. __is_lm_address(__x) ? __lm_to_phys(__x) : \
  207. __kimg_to_phys(__x); \
  208. })
  209. #define __pa_symbol_nodebug(x) __kimg_to_phys((phys_addr_t)(x))
  210. #ifdef CONFIG_DEBUG_VIRTUAL
  211. extern phys_addr_t __virt_to_phys(unsigned long x);
  212. extern phys_addr_t __phys_addr_symbol(unsigned long x);
  213. #else
  214. #define __virt_to_phys(x) __virt_to_phys_nodebug(x)
  215. #define __phys_addr_symbol(x) __pa_symbol_nodebug(x)
  216. #endif
  217. #define __phys_to_virt(x) ((unsigned long)((x) - PHYS_OFFSET) | PAGE_OFFSET)
  218. #define __phys_to_kimg(x) ((unsigned long)((x) + kimage_voffset))
  219. /*
  220. * Convert a page to/from a physical address
  221. */
  222. #define page_to_phys(page) (__pfn_to_phys(page_to_pfn(page)))
  223. #define phys_to_page(phys) (pfn_to_page(__phys_to_pfn(phys)))
  224. /*
  225. * Note: Drivers should NOT use these. They are the wrong
  226. * translation for translating DMA addresses. Use the driver
  227. * DMA support - see dma-mapping.h.
  228. */
  229. #define virt_to_phys virt_to_phys
  230. static inline phys_addr_t virt_to_phys(const volatile void *x)
  231. {
  232. return __virt_to_phys((unsigned long)(x));
  233. }
  234. #define phys_to_virt phys_to_virt
  235. static inline void *phys_to_virt(phys_addr_t x)
  236. {
  237. return (void *)(__phys_to_virt(x));
  238. }
  239. /*
  240. * Drivers should NOT use these either.
  241. */
  242. #define __pa(x) __virt_to_phys((unsigned long)(x))
  243. #define __pa_symbol(x) __phys_addr_symbol(RELOC_HIDE((unsigned long)(x), 0))
  244. #define __pa_nodebug(x) __virt_to_phys_nodebug((unsigned long)(x))
  245. #define __va(x) ((void *)__phys_to_virt((phys_addr_t)(x)))
  246. #define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
  247. #define virt_to_pfn(x) __phys_to_pfn(__virt_to_phys((unsigned long)(x)))
  248. #define sym_to_pfn(x) __phys_to_pfn(__pa_symbol(x))
  249. /*
  250. * virt_to_page(k) convert a _valid_ virtual address to struct page *
  251. * virt_addr_valid(k) indicates whether a virtual address is valid
  252. */
  253. #define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET)
  254. #ifndef CONFIG_SPARSEMEM_VMEMMAP
  255. #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
  256. #define _virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
  257. #else
  258. #define __virt_to_pgoff(kaddr) (((u64)(kaddr) & ~PAGE_OFFSET) / PAGE_SIZE * sizeof(struct page))
  259. #define __page_to_voff(kaddr) (((u64)(kaddr) & ~VMEMMAP_START) * PAGE_SIZE / sizeof(struct page))
  260. #define page_to_virt(page) ((void *)((__page_to_voff(page)) | PAGE_OFFSET))
  261. #define virt_to_page(vaddr) ((struct page *)((__virt_to_pgoff(vaddr)) | VMEMMAP_START))
  262. #define _virt_addr_valid(kaddr) pfn_valid((((u64)(kaddr) & ~PAGE_OFFSET) \
  263. + PHYS_OFFSET) >> PAGE_SHIFT)
  264. #endif
  265. #endif
  266. #define _virt_addr_is_linear(kaddr) (((u64)(kaddr)) >= PAGE_OFFSET)
  267. #define virt_addr_valid(kaddr) (_virt_addr_is_linear(kaddr) && \
  268. _virt_addr_valid(kaddr))
  269. #include <asm-generic/memory_model.h>
  270. #endif